05 Center Console Screws

[drewtj05]

Just picked up a used center console and I don't have the screws that attach the console to the tub under the rear cup holders. I am not sure how exactly it's fastened. Right now my Jeep only has two holes that are covered with a rubber gasket. Anyone have a photo of these, was looking at just going to the hardware store to find something that would work.

The ones im looking for are item 3 in the diagram on the back console. Is there something that a screw is supposed to thread into because the hole that is covered by the rubber plug is pretty big.

 

[Midtenn]

I ran into this I think it’s an m6.

 

[verf]

Lol, lost the same hardware, #3 in the breakdown. Ever find out what the exact size was? I've tried Mopar and RockAuto and none offer hardware help. Thanks.

 

[voodooridr]

The insert in the floor should be a
6503245
Looks like a 6mm rivnut

 

[verf]

The insert in the floor should be a
6503245
Looks like a 6mm rivnut

Thanks. I live way out there, so gotta mail order them, hoping someone had the part number, Amazon link or exact size.

 

[NDSpeed]

Thanks for the thread. Ran into the same problem. Just haven’t addressed it yet.

 

[Cloaked_TJ06]

The insert in the floor should be a
6503245
Looks like a 6mm rivnut

Came across this and wondering the same thing , I have the same issue with holes in floor and no rivnuts since mine is an early 2006 with no center console but I picked mine up locally with all hardware but wont screw down . Should I just get a rivnit gun tool to do manually and I did copy that part number into Google and shows up mopar cooler to closure panel nut/rivnut 2001 to 2016. Is that the correct ones to get for my situation ?

 

[voodooridr]

Came across this and wondering the same thing , I have the same issue with holes in floor and no rivnuts since mine is an early 2006 with no center console but I picked mine up locally with all hardware but wont screw down . Should I just get a rivnit gun tool to do manually and I did copy that part number into Google and shows up mopar cooler to closure panel nut/rivnut 2001 to 2016. Is that the correct ones to get for my situation ?

My LJ already had the 6mm rivnuts installed from the factory. Any 6mm rivnut should work, the accessory full console used sheet metal screws at the rear