ARB Compressor Install Question

Sj's TJ

TJ Addict
Original poster
Supporting Member
Joined
Jun 2, 2018
Messages
1,132
Location
Vienna, VA
Hey all. I'm getting ready to install an ARB compressor to run my rear locker and on-board air. I've read the instructions several times and I feel pretty good about most of it. One thing that I'm a little foggy on is the ignition wire and dash illumination wire. I know I can get the ignition wire from the cigarette lighter, but I'm not to sure about the dash illumination wire. Any easy place to find this wire? Thanks ahead of time.
 
I tapped into the HVAC plug. It’s the solid orange wire (on my 2004). Remove the terminal from the cavity and solder a plug on the end.
AAAB7A61-7E47-4652-B64A-FF6BADEDCD63.jpeg
9A8EE4AF-FE1D-438B-B2BB-CB466C187C4F.jpeg
E5776B95-955E-4FAF-AC7E-804C55CF2DB7.jpeg
 
Last edited:
  • Like
Reactions: Sj's TJ