Broken OBDII connector

[CJDalling]

Hey y'all, long time reader, first time poster. On one of our many off road trips, I guess I sent it a little too hard. I broke my OBD port with my foot or leg. I was going to buy another one off of Rock Auto. But I need the wiring diagram so I can re-pin it correctly. I have an 05 X, manual. Can anyone help me?

 

[voodooridr]

I just moved one wire at a time when I did mine, worked out fine

 

[flyinfish]

Download the Factory Service Manual for your 2005 and you'll find the pinout on 8W - 80 - 24

https://wranglertjforum.com/threads...ice-manuals-fsm-technical-documentation.4618/


Welcome to the forum!

 

[RocknLJ]

I just did mine

Get wire labels or tape and label each wire before you take out the pins.
I used a very small jewelers screwdriver to de-pin the connector. Search on you tube if you are unfamiliar with the process.
Be cognizant of how the pins are oriented in the housing when you remove them so you can make sure they are installed correctly into the new housing.(top vs bottom of pin) this will ensure they lock properly.

 

[macleanflood]

On my 97 the positive power wire in the bottom corner corroded out. I ordered a whole new connector and pigtail on Amazon...then de pinned the wire I needed and spliced it in to my existing port.

Still like to identify the type of connector pin. Would have been easier to cut the wire back 1/2" and crimp in a new pin.

-Mac

 

[RocknLJ]

I use Deoxit and it helps get rid of corrosion in most cases.
Been restoring vintage tube guitar amps for a long time and this product works well. Use it on all sorts of connectors and switches.

https://caig.com/deoxit-d-series/

 

[CJDalling]

Download the Factory Service Manual for your 2005 and you'll find the pinout on 8W - 80 - 24

https://wranglertjforum.com/threads...ice-manuals-fsm-technical-documentation.4618/


Welcome to the forum!

Thank you!

 

[Artsifrtsi]

I use Deoxit and it helps get rid of corrosion in most cases.
Been restoring vintage tube guitar amps for a long time and this product works well. Use it on all sorts of connectors and switches.

https://caig.com/deoxit-d-series/

Deoxit is THE best!

 

[OldBuzzard]

Still like to identify the type of connector pin. Would have been easier to cut the wire back 1/2" and crimp in a new pin.

@macleanflood , it might be the first one on this Mouser page (50420-8000).