Front end rebuild parts list - Please double check me before I place order

[Bushfamily5]

I want to replace most of the front hub/axle assembly on my 2004 Jeep lj (3" lift with 33" tires). Not very mechanically inclined but want to get through it. I planned to order the following parts to complete the work. What am I missing?

1. Axles - Pre-assembled Ten Factory (MG22148) chromoly axles
2. Axle Seals - Ten Factory MG21102
3. Crown Steering knuckles
4. Re-paint and re-use brake shields
5. Hub & Bearing Assemblies - Moog 513158
6. Hub bearing mounting bolts
7. Ball Joints - Moog K3134T & K3161T
8. Centric 120.67045 Rotors
9. Clean up and re-use brake calipers
9. Black Magic brake pads

Missing items?
Better products than spec'd in same price range?

I am re-building the front end as it had been sitting for quite a while and needs attention although I may be going overboard getting it ready to be my daughter's first vehicle (Hers on the weekdays - Mine on the weekends). I have already replaced tie rod, drag link, track bar, stabilizer, all 8 control arms.

Thanks for the check!!

 

[oldtimer]

How about the pinion seal and bearing?
Did you install new bushings for the control arm mounting points?
Not an expert at all, but just thinking with my thumbs

 

[RubiconRic]

Looks pretty thorough. If you're going through that effort of replacement/overhaul you may consider the semi-loaded reman Centric calipers. I just did rotors/pads on mine and tried to reuse the calipers but ended up replacing both (at different times) because they both locked up - and yes, the fluid was flushed first - I think the issue was debris in the piston, which I don't know how to disassemble and clean so just bought new calipers instead.

As for mfrs, I've always used Spicer ball joints and Timken wheel bearing & hub assemblies, so can't really comment on Moog.

 

[Bushfamily5]

Thanks for the input:

Pinion seal & bearing - I planned on doing when I replace the drive shafts. They don't seem to be leaking yet but I'd like to replace the stock drive shafts soon

Control Arm Bushings - Yep - Replaced them all (even those nasty uppers. They suck!!)

 

[Bushfamily5]

I'll look into the centric calipers

thank you

 

[freebo86]

Spicer ball joints for sure.

 

[cpwolf]

Spicer ball joints for sure.

X2 I would get Spicer Ball Joints.