Mopar engine mounts

[3jeepfan]

What is the preferred 4.0 engine mount now? It seems the Mopar mounts are discontinued. I have the Brown dog rubber 1 inch raised mounts, & they are starting to sag. So I'm going to swap back OEM with Savvy aluminum mml. Is crown any good?

 

[3jeepfan]

So I did some more searching, seems the crowns are made in PRC. Some people recommend the MORE bomb proof mounts. Maybe I'll check those out.

 

[Jerry Bransford]

I installed a pair of Bombproof engine mounts from https://mountainoffroad.com/collect...f-motor-mount-kit-for-1-lift-97-06-yj-tj-lj-1 and of the several engine mounts I have installed including from Currie and Brown Dog, the Bombproof mounts were by far the best and beefiest of them all. I wouldn't touch another from Brown Dog whose rubber bushings are not all that good of quality.

 

[Jerry Bransford]

I installed a pair of Bombproof engine mounts from https://mountainoffroad.com/collect...f-motor-mount-kit-for-1-lift-97-06-yj-tj-lj-1 and of the several engine mounts I have installed including from Currie and Brown Dog, the Bombproof mounts were by far the best and beefiest of them all. I wouldn't touch another from Brown Dog whose rubber bushings are not all that good of quality

@3jeepfan I corrected my link to the version that is 1" taller as I installed and what you need.

 

[3jeepfan]

I had high hopes for the browndog w/rubber inserts, but as I've seen in other posts. They are too soft. Starting to sag. I haven't noticed any vibration though.

 

[3jeepfan]

@3jeepfan I correct my link to the version that is 1" taller as I installed and what you need.

Thanks, the browndog's are 1" lift also. I also have savvy BL & cable shifter. When the funds allow, I hope to get a raised skid.

 

[Jerry Bransford]

Thanks, the browndog's are 1" lift also.

That's why I corrected the link so the Bombproof mounts would be correct.