Off road only theft deterrent system

[Boomer453]

I bought this to install on my 2006 TJ 4.0

I was just looking at before getting started and wondering if anyone who has I stalled one could share where they spliced into the #9 wire on the connector at? The wires on the ORO unit seem too short to reach a useable spot to me for some reason.

 

[Chris]

You bought what to install?

Pictures or more details would help tremendously. In addition, if the wiring is too short all you have to do is extend it.

 

[jjvw]

What color is your key?

 

[TJ Jim]

I’m assuming they are talking about this

 

[TJ Jim]

https://offroadonly.com/shop/other/off-road-only-theft-deterrent-system/

 

[jjvw]

I’m assuming they are talking about this

This thing right here?

 

[TJ Jim]

This thing right here?

Yeah yeah that’s the thing.

 

[TJ Jim]

I bought this to install on my 2006 TJ 4.0

I was just looking at before getting started and wondering if anyone who has I stalled one could share where they spliced into the #9 wire on the connector at? The wires on the ORO unit seem too short to reach a useable spot to me for some reason.

If you’ve got a gray key I wouldn’t do it.

 

[DuckNut]

I agree with TJ Jim.

Just splice into the fuel pump line and run it through a rocker switch mounted in the dash panel. Get the rocker switch cover that say "anchor".

 

[Moglocker]

I bought this to install on my 2006 TJ 4.0

I was just looking at before getting started and wondering if anyone who has I stalled one could share where they spliced into the #9 wire on the connector at? The wires on the ORO unit seem too short to reach a useable spot to me for some reason.

I use that one it’s been in for years and works flawlessly.the two wires are for bypass of the system (in case you have someone else driving)I glued part of an ink pen body behind my dash to keep the reed switch in.

 

[Boomer453]

I use that one it’s been in for years and works flawlessly.the two wires are for bypass of the system (in case you have someone else driving)I glued part of an ink pen body behind my dash to keep the reed switch in.

Thanks for that, how did you mount the magnetic switch/relay?

 

[Moglocker]

Thanks for that, how did you mount the magnetic switch/relay?

Glued part of an ink pen body behind my dash next to the radio to hold it,when I take the bezel off I just slip it out of the tube.