Rattle can paint for half doors

[JMT]

Got the same paint and am planning to spray them this week, they sent me grey primer instead of white!! - do you remember what you used?

Gray primer is usually preferred over white.

 

[TEEJAY00]

Gray primer is usually preferred over white

The jeep has white primer from the factory so i just went with that

They came out pretty good!

 

[CreepinDeth]

I've had very good results with rattle cans. I did these flares years ago when I was converting my LJ into a pickup and they held up very well:

View attachment 156455

And recently I did this CJ/JL-style TJ grille with rattle cans.

View attachment 156456

Color on both is an exact match for the factory color.

One thing I highly recommend is doing a very durable clear coat over the rattle can color. The best way to do that with rattle cans is to use a 2k (2 component) clear like this one from Eastwood: https://www.eastwood.com/eastwood-s...zlXXMFxQuK_Z-Uc95KWsIC7ykQWpnvmYaAhuOEALw_wcB or the SprayMax clear posted by @CodaMan earlier in this thread. These come in a special can which provides for mixing the two components before spraying and as a catalyzed finish it's very durable.

well damn…..that changes things

I just may have some faith to repaint some wrong color doors with rattle can paint after all.