Rear shock mount hardware

[StG58]

Getting ready to change out the rear shocks on my TJ, and would like to replace the mounting hardware. Since I'm to lazy to dig through my FSM to figure out the bolt sizes, does anyone know what the bolts sizes are for the upper and lower rear shock mounting bolts, and are they a Dealership only item? Thanks a bunch!

 

[Serbonze]

Upper is M8x1.25x30mm

Lower is M12x1.75x65

I found a local fastener shop that had them in 10.9 and yellow zinc plated.

 

[StG58]

Upper is M8x1.25x30mm

Lower is M12x1.75x65

I found a local fastener shop that had them in 10.9 and yellow zinc plated.

Thanks a bunch @Serbonze , thats exactly what I was looking for!

 

[Serbonze]

No problem at all. I'm sure you know this, but they can be a real pain in the ass. I hit the uppers with PB Blaster for about two weeks then blasted them with CRC Freeze-Off. They came out without any problems.

http://www.amazon.com/gp/product/B000TFTH00/?tag=wranglerorg-20

 

[StG58]

Ya, not looking forward to this process. Got a fresh can of PB Blaster on the bench and queuing up to use a buddies impact wrench. Thanks for the tip on CRC Freeze off.