Ok found a bush fix, it was on another forum and when I tried to link it starred out, so guess that’s prohibited.
Copied and pasted the info:
//////////////////////////////////////////////
Okay, hopefully the pics will be somewhat self explanatory.
Pic 01 shows the problem nylon bushing that the fold and tumble seat rides on.
Pic 02 shows the assortment of washers and bushings I bought from Ace Hardware(where I always wind up because Fastenal and Grainger doesn't have it).
Pic 03 shows 3 things: Orange area will need to be ground off until bushing is even with bolt head. Red area shows where seat would ride "if" you grind off the blue area. Blue area is where my seat rides now(once that area gets worn, I will remove bolt and grind it down so seat rides in red area).
Pic 04 shows the bushing after grinding off orange area so that it is even with bolt head.
Pic 05 shows the bolt with new bushing installed on seat(tension bushing is now resting on the shoulder of my new bushing rather than bolt head).
It takes less than an hour to replace all 4 bushings, 2 on each seat.