Started to remove the back bumper on my 06 LJ. The lower nuts came off OK with an 18 mm socket and a breaker bar. The upper ones have a body mount? in the way to get a socket on them. Any suggestions? I don't have an 18 mm open end wrench.
My Parts List says NUT, Hex, .437-14, (NOT REQUIRED)
Update: I beat a 12 point socket on and got them both loose with some PB Blaster. Now to pry the bumper loose.
Found the two bolts underneath going into the frame rails. Whew. Bumper is off and headed to the powder coater tomorrow.
Ordering new rear bleach bottles.