Steering linkage hitting track bar mount

[Jmr17320]

99 TJ
6” long arm lift, has a front drop track bar mount on the frame and a drop pitman arm. I believe this to be the correct setup due to the drop track bar frame mount. ZJ steering upgrade

BUT I am getting some rubbing at the axle track bar mount.

any ideas? I bought all new steering linkage components but don’t want to mess them up due to a binding issue.

 

[someguysjeep]

if you have new stuff this crap doesn't matter. get it hung and see if it's still an issue.
1 of those steering sticks could be bent some or those LA's are holding the axle just a bit to far forward, are they adjustable?

whats replacing this stuff?

 

[hosejockey61]

You can bend the drag link to push it out if necessary. I had to do that to mine.

 

[Jmr17320]

if you have new stuff this crap doesn't matter. get it hung and see if it's still an issue.
1 of those steering sticks could be bent some or those LA's are holding the axle just a bit to far forward, are they adjustable?

whats replacing this stuff?

Negative on adjustable CAs

 

[Jmr17320]

H

You can bend the drag link to push it out if necessary. I had to do that to mine.

How did you bend it? I don’t have a torch

 

[jjvw]

H

How did you bend it? I don’t have a torch

Use a press.

 

[Jmr17320]

Ha! Have one of those. Good idea. I will test fit first to see if needed