Suspension time (budget is 2k)

[BugoutJeep]

done!

So what else do I need?

On order:
- Savvy 4"
- SYE and Tom Woods shaft
- Rancho RS500x

Do I need:
- Extended brake-lines? If so which ones are the "go to"?
- Steering stabilizer? If so which one?

https://www.amazon.com/dp/B000C53XRK/?tag=wranglerorg-20

That's the stabilizer I got for a smaller lift, but maybe bump Monday for some others to chime in on those items, because I don't know.

There are some resource type threads on these lifts and what you need. One of my issues is that I haven't seen specific lists with these kits

 

[06lj]

done!

So what else do I need?

On order:
- Savvy 4"
- SYE and Tom Woods shaft
- Rancho RS500x

Do I need:
- Extended brake-lines? If so which ones are the "go to"?
- Steering stabilizer? If so which one?

Raybestos YJ brake lines are slightly longer and work. You will need to order the correct crush washer.
Alternatively you can drill a couple holes and relocate the brake line bracket lower.

When you get your 33's I will also highly recommend a set of Black Magic brake pads.

 

[csaxj3]

Might actually run a 285/75/16 as it gives a lot more options and is a 33x11.

If i do and get 16x8 wheels, would I want 4, 4.25, or 5" backspacing? Would prefer as tucked as possible while not rubbing.

 

[FireJeep]

I second the Black magic brakes, I run 28575R16 on my stock Moab wheels and the brakes make a big difference. I am envious of your lift choice, although I run the DPG ultimate kit (bought it 6 months after buying my LJ brand new in 2005) and have been happy with it ever since. Although the stock OME shocks from back then blew seals too easily, the Bilsteins seem to be ok....thinking about trying the RS5000........

 

[csaxj3]

Since this is now my de-facto build thread here is where I stand:

Ordered / have on hand
- Savvy 4" kit on order, pending leadtime / shipping
- AA SYE and TW Driveshaft also ordered through Savvy
- Tomken winch plate
- Warn 8k winch
- MORryde tire carrier bracket

Up next
- 33x10.5's
- 15x8 with 4.5" bs
- powertrax for the front

 

[csaxj3]

Ordered wheels and tires today.

33x10.5 Maxxis Razr's and 15x8 d windows (+6 / 4.75bs).

Can't wait for this to come together!

 

[R3ID05TJ]

This is gonna look sick.

 

[Chris]

Very cool! Be sure to make a build thread in the TJ Build Threads & Member's Rides section so we can follow along easier

 

[LieutenantJohnson]

Ordered wheels and tires today.

33x10.5 Maxxis Razr's and 15x8 d windows (+6 / 4.75bs).

Can't wait for this to come together!

right on bud! Gonna be a sweet transformation. I remember the day my mini jeep got its first upgrade. I wanted to drive it everywhere, except the Mall!

 

[csaxj3]

P0138 showed up today - looks to be the upstream O2 sensor.

Going to drop it off at the shop this week to look at the cats/exhaust as there is a rattle and I'm afraid one might have imploded.

Anyways, that's cost of baselining a 18yr old vehicle. NGK/NTK sensors, new cats, and muffler? Want to go ahead and have things done now vs have to later.

Also need some nutserts to replace when skids start coming off.

 

[csaxj3]

Well, she's back.....

 

[LieutenantJohnson]

Looks good! Now it is time to go play with it and see what it is capable of. Then make a list of future mods needed

 

[csaxj3]

Looks good! Now it is time to go play with it and see what it is capable of. Then make a list of future mods needed

Just gears and a powertrax for the front.

which was on "phase 1" but I didn't get around to ordering.

Might sneak out to LBL or Wooly's this weekend if I can get away from the "Minister of Finance & Planning"

ETA:
Sliders, front and rear bumpers, etc have been on order. Outside of those as well - I'm done

 

[Dunkut88TJ]

Looking good!!