What did you do to your TJ today?

[Grenadiers]

Looks like you are well on your way.

If you don’t mind sharing, let us know where your switch is located along with your final mounting locations.

The PO connected mine to the front trail/fog lights. The button on the end of the turn signal switch. Pull it out, they’re on.

 

[AndyG]

Put on the Hardtop and loaded up the fishing gear to chase some stripers- love this LJR

 

[TheBoogieman]

loaded up the fishing gear to chase some stripPers

You left out a P. No need to chase them. They come right to you if you have cash.

 

[Andy-WhiteTJ]

You left out a P. No need to chase them. They come right to you if you have cash.


View attachment 573136

I knew you would say something about that!!!

 

[Rubiconned]

Put on the Hardtop and loaded up the fishing gear to chase some stripers

 

[AndyG]

Thats us -

View attachment 573148

Away we go.....

Boat hooked up now - LJR’s parked

 

[mjonesjr84]

Mounted the Packout plate I got from Etsy. Got tired of them bouncing around.

Installed a CMM grab bar.

 

[Weasellee]

More frame prep. Ready for my welder to come back. Rear half is cut and prepped.

Look at these tails I cut out of this pig. I’ll be real happy when this project is finished

And the pile of dust …

 

[red02tj]

Waiting for the rain to stop. Or our garage to magically fit the jeeep.

View attachment 572881

Rain stopped. Didn’t let out any of the magic smoke and started right up. Only issue was when I dropped the FW ground bolt and my “helper” put it in his toolbox. Bonus 30min scavenger hunt in the driveway leaves.

 

[SPECWAR]

Put on the Hardtop and loaded up the fishing gear to chase some stripers- love this LJR

View attachment 573131
View attachment 573132View attachment 573133

Damn, and all I have is a cheap ass Harkin lift

 

[Pascal25]

Finished redoing the timing belt tensioner, so no more slapping belt and sounds so much better.
Still can't get it to rev past about 2400 though... What can cause it to just limit there?

 

[AndyG]

I am so fortunate this guy is one of my close friends.

He is a partner in a commercial construction company and he built this building out of some things he was tearing down.

He is a sharp dude- Class person.

Damn, and all I have is a cheap ass Harkin lift

 

[John Cooper]

Finally got to do some work to BB late today. Work got in the way earlier this morning.

After replacing the rear brakes and rotors on my wife's Nissan Armada.

I jumped on BB, got the seats put back in and cleaned up the shop floor and put all my tools up.

Got the tape measure and made sure the axles were square and they were.

Drove down our road, got up to 75mph and had slight vibes, guessing in need to dial the rear drive shaft angle in.

 

[red02tj]

Finally got to do some work to BB late today. Work got in the way earlier this morning.

After replacing the rear brakes and rotors on my wife's Nissan Armada.

I jumped on BB, got the seats put back in and cleaned up the shop floor and put all my tools up.

Got the tape measure and made sure the axles were square and they were.

Drove down our road, got up to 75mph and had slight vibes, guessing in need to dial the rear drive shaft angle in.

Bet those new headlights would balance out the vibes :)

 

[AndyG]

Headed home-

Killer day. No fish. All smiles.

Hot heads head liner, heated summit seat foam, the Eagles making for a fine ride through the fine Alabama highlands.

I love it when a rig is everything you want-

If you guys get the chance to meet @Hog do it.

Really the entire thing that we have put together from the forum is a great bunch. @John Cooper , @Ranger. @tnjeepguy, @tr21triton .... I am always happy to see them.

 

[John Cooper]

Bet those new headlights would balance out the vibes :)

If I get them installed......

 

[tr21triton]

Headed home-

Killer day. No fish. All smiles. View attachment 573242

Hot heads head liner, heated summit seat foam, the Eagles making for a fine ride through the fine Alabama highlands.

I love it when a rig is everything you want- View attachment 573241

View attachment 573243

If you guys get the chance to meet @Hog do it.

Really the entire thing that we have put together from the forum is a great bunch. @John Cooper , @Ranger. @tnjeepguy, @tr21triton .... I am always happy to see them.

View attachment 573240

I agree Andy. We always have a such a good time when we get together. I'm so glad I have such a good group of friends Even if y'all are a bunch of PERVERTS

 

[John Cooper]

Headed home-

Killer day. No fish. All smiles. View attachment 573242

Hot heads head liner, heated summit seat foam, the Eagles making for a fine ride through the fine Alabama highlands.

I love it when a rig is everything you want- View attachment 573241

View attachment 573243

If you guys get the chance to meet @Hog do it.

Really the entire thing that we have put together from the forum is a great bunch. @John Cooper , @Ranger. @tnjeepguy, @tr21triton .... I am always happy to see them.

View attachment 573240

Spot on brother!!!

 

[AndyG]

This member invited me to a party in Blue Ridge-

Him- “We gonna smoke smoke, we gonna drank, shoot guns, fight, have wild sex....”

Me -“Uh, ok, what time should I get there?”

Him- “It don’t matter, It’s just gonna be us two”

 

[HWNPUNCH]

I popped off the the front diff cover off to check out gearing, 4.88. Been curious since I purchased this jeep July 2024. I was thinking gearing down to 4.56 but i think i would regret it. Just looking for better highway speed. It will go 70 no problem with the 4.0 and a Banks Sidewinder just don’t feel comfortable running 3500 rpm and screaming. 4 speed auto? I currently have 3 speed auto with tera-low transfer case and 35” coopers. Suggestions?