I just received my tom woods cv drive shaft for my 99 tj. It did not come with new bolts or straps. Will the factory hardware work? I threw my old bolts/straps away. Don't want to pay $10 in shipping if I can get it locally. Thanks
Tom Wood CV driveshaft strap bolt size
- Thread starter Crashmymax
- Start date
Unless you are changing yokes there is no reason you can not get hardware locally.
If your new TW shafts use 1310 size u-joints just go into NAPA etc. and ask for a Dana-Spicer 1310 size u-joint strap kit.
Perfect thanks guys. This jeep is getting close to being road worthy. Getting excited! 35" bfg's are on backorder but that should give me time to get the blower installed. 
Seriously, Tom Woods is too nice to their customers. I'm experiencing some binding with my 1350 front (due to the equivalent of ~9-10" of lift seen at the driveline with 7" of down travel). I called them up and they're sending me a return shipping label, going to rebuild my driveshaft to allow for an extra 1-2* of angle, and shipping it back to me free of charge. I insisted on paying because it's not anybody's fault. But they refuse to run my credit card.
Edit: I posted in the wrong TW thread... Oops. https://wranglertjforum.com/threads/another-glowing-review-for-tom-woods-driveshafts.45858/
Edit: I posted in the wrong TW thread... Oops. https://wranglertjforum.com/threads/another-glowing-review-for-tom-woods-driveshafts.45858/
Last edited:
35x12.50R15? KO2 or KM3?Perfect thanks guys. This jeep is getting close to being road worthy. Getting excited! 35" bfg's are on backorder but that should give me time to get the blower installed.
I see backorder on KO2, but KM3's are out there.
BFG rebate is Feb 12-19 at independent dealers. $70 for KO2, and KM3 styles.
There is also a "Tradesman" rebate available to those who qualify. Its also $70 and can be stacked with other rebates not to exceed a total rebate of $150.
Go to: https://www.bfgoodrichtires.com/tradesmen.html
Subject to terms and conditions of course. Please read the fine print. I can help with questions if you have any.
Similar threads
