Latest activity Postings Attachments Images About
-
-
you don't want to bend them by hitting them. Caps need to come off,use a spreader as already suggested and probably change up the shim... -
Thanks! It just bolted right up. I was expecting some exhaust interference, but I can get my hand above the muffler and cat and there...
-
This. Air lockers are one that you have to be extra aware to get the preload right and the one time I recommend using a case spreader.
-
I should clarify that it depends on what locker you are installing. But most master install kits provide shims that go outside the...
-
Woodrow replied to the thread Dana 30 shims slipped out of place.Instructions?🤣 I just did it like the Truetrac that came out and used a second set of new carrier bearings to make set-ups. But the...
-
Woodrow replied to the thread Dana 30 shims slipped out of place.Uh oh. Why is that? I have an e-locker in my Dana 30. What did I mess up?
-
Woodrow replied to the thread Dana 30 shims slipped out of place.I know you said its a high pinion, but on my LP Dana 30 the shim stack is under the bearing, not outside like on my Dana 35 for example. I’ve...
-
Try a 01/96 build.... Mine has a lot of left over parts from the YJ I swear.
-
I agree with you completely on the aesthetics of the coupe/2-door hardtop over most convertibles. GM bubble-top cars had some beautiful...
-
And there are those who swear open headers make less power than full tunes exhaust …
-
-
I've always thought of being lowered like that as an anti-towing, park where you want to feature. ;)
-
He really needs to lower it a little more, though...:sneaky:
-
Speaking of Ford trucks, here's a unibody. One of my dad's friends has a '63 unibody that his dad won new at the local county fair. I...
-
Woodrow replied to the thread Car pics too cool not to share.My 5/96 mfg ‘97 certainly has some eccentricities (especially electrical).
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
