Yes if your existing engine mounts and especially the rubber bushings are still in very good condition.Would you recommend the savvy spacer kit over the M.O.R.E. bomb proof mount?
Yes if your existing engine mounts and especially the rubber bushings are still in very good condition.Would you recommend the savvy spacer kit over the M.O.R.E. bomb proof mount?
Thanks for the response, you just saved me $100
one of the few mods where the most sensible thing is just to get whatever color you like the most.
Rough Country (and apparently Lis which I was unaware of until today) are bare aluminum and cost $60 and $50, respectively.
View attachment 366320
JKS is red and costs $75.
View attachment 366318
Savvy is black and costs $85.
View attachment 366319
and that's it.
The curves on the JKS kinda turn me on. The red is the icing on the cake!
Want to put Savvy 1.25" body lift on. Already have 4 in suspension lift. What 1" motor lift should I use and will I have to adjust any linkages. Just installed 35's and need a little more clearance.
The curves on the JKS kinda turn me on. The red is the icing on the cake!
call me crazy but I'd roll the dice on the t-case shifter. You're raising the motor mounts 1" and the t-case mechanism is barely out of the pivot point. It's moving a small fraction of what you're lifting the motor. Save the $180 unless you're planning on a tummy tuck.
I did have to create some clearance for the MML on the passenger side.
View attachment 366361
View attachment 366362
Is that Savvy's lift blocks? Anyone else had this issue?
Is that Savvy's lift blocks? Anyone else had this issue?
Is that Savvy's lift blocks? Anyone else had this issue?