What did you do to your TJ today?
- Thread starter LJRubiconGuy
- Start date
My guess is 66"-68", assuming that pallet is 40"x48". Thanks, Pythagoras...
You are probably correct! To late to measure it though, the equipment left today on a low-boy trailer for the shores of Jersey to be crated and shipped to Japan.
Also, I recently installed a Front Runner tailgate table.
Thread 'Front Runner Tailgate Table'
https://wranglertjforum.com/threads/front-runner-tailgate-table.75166/
Thread 'Front Runner Tailgate Table'
https://wranglertjforum.com/threads/front-runner-tailgate-table.75166/
I think your picture helps me to understand your post.
Ahhhhhh, just how many coolers do you need???
I think your picture helps me to understand your post.
Ahhhhhh, just how many coolers do you need???
No the question should be how many beers do you drink ?
I think your picture helps me to understand your post.
Ahhhhhh, just how many coolers do you need???
Haha, I was wondering if someone would mention that.
But since you kind of asked…really only 3 of them in that picture are actually mine. One of them being a 2 tap jockey box.
Man it has to suck living in an inspection state
A different viewpoint is it sucks living in a non-inspection state where people can drive unbelievably dangerous POS stuff on the roads and never get stopped. You wouldn't believe what you see on the roads here all the time. They're putting everyone in danger.
Had the fuel injectors cleaned today. Wow. As soon as it started after reassembly I was amazed at how smoothly it was idling. Before it just felt coarse at idle and under power. No codes or any real reason to get them done other than 21 years old, 120k miles and it sat a lot the 7 years before I got it. Original Mopar parts. On the drive home it felt like it spools up a bit faster but who knows. I R&Red them at my Indie's shop and he put them through the cleaning process with his machine. Pretty gunked up, the solvent and ultrasonic fluid got dirty. One flowed a bit more on the first test/flush. I use Top Tier gas 50% of the time and have run a bottle of Techron or something through every month since March. Not sure what that says, 1. that the gas and cleaner products don't work or 2. they were really gunked up but getting cleaned out or 3. just too dirty to get clean without removing and cleaning. I'm happy with the result.
I was watching the O2 sensor voltage on the way there and was seeing some .9s , on the way home .8 was highest for whatever that means.
I was watching the O2 sensor voltage on the way there and was seeing some .9s , on the way home .8 was highest for whatever that means.
Do you watch the news? Stay away from the border states. I hear they're overrun by illegal aliens.
Do you watch the news? Stay away from the border states. I hear they're overrun by illegal aliens.
Yep, Alabama sucks, no trails, Illegals everywhere. Dirt poor folks, and lord the rednecks are unbearable!!!!!
Can't wait till I can get out of here and head north, maybe Tennessee or Kentucky!!!!!
Yep, Alabama sucks, no trails, Illegals everywhere. Dirt poor folks, and lord the rednecks are unbearable!!!!!
Can't wait till I can get out of here and head north, maybe Tennessee or Kentucky!!!!!
Come to Va. All the illegals stay at Walmart here.
Yep, Alabama sucks, no trails, Illegals everywhere. Dirt poor folks, and lord the rednecks are unbearable!!!!!
Can't wait till I can get out of here and head north, maybe Tennessee or Kentucky!!!!!
No Kentucky for me. The devil lives in Kentucky (xwife)
Yep, Alabama sucks, no trails, Illegals everywhere. Dirt poor folks, and lord the rednecks are unbearable!!!!!
Can't wait till I can get out of here and head north, maybe Tennessee or Kentucky!!!!!
For you, John, I recommend - - - - Kentucky.
I wasn’t part of team super secret, but I wrapped mine up this fall.
A peak into my R&D process.
1. Did some digging around, bent some pinch seams over and got my model drawn based off the dimensions I pulled.
2. 3D printed some profiles for testing. Once happy with the fit and height I had a short section cut and bent.
3.ordered full lengths. Countersunk holes and built torque box spacers and rub rails. Capped the front edge.
For you, John, I recommend - - - - Kentucky.
You must have me mistaken with @AndyG and his love for banjo music
This is coming from a guy who was upset that his high school girlfriend is expecting a baby-
Me -“Well John, people grow up and move on.”
John -“ yeah but she’s 16. She’s still in high school”.
At least she's not my sister or cousin!!!!!
Niece isn't better