What did you do to your TJ today?
- Thread starter LJRubiconGuy
- Start date
New springs all around.
Pretty easy job. This guys video was pretty accurate on how to do it. Swap TJ Jeep Springs
Pretty easy job. This guys video was pretty accurate on how to do it. Swap TJ Jeep Springs
Honestly not a lot, I did put a new decal I got from @DougyintheBushies a few days ago!!!
View attachment 506010
Won't that get you shot in Alabama?
Won't that get you shot in Alabama?
More so in Tennessee. They ain't beat Georgia in 7 years.
Engine rebuild?.......Nah new wheels and tires 
Had too cause my old of wheels and tires were bad/kinda bald
Anyways here's some shots with no hood still and it will remain with no hood cause I'm lazy since I'm gonna be rebuilding my motor......yeah that's a good excuse
these are Dextero DAT1 31x10.5r15s on some Nomdad convoy wheels,got the tires balanced and installed for 420
(hehe 420) first 90 ish miles today and they feel great,they're an At so they are nice and quiet track straight going 95 and they're cheap ! Once i rebuild my motor I'll see how they do out in the rocks at Bridgeport Ohv !
And here's a view from Uptop and im loving the offset of these,they poke out a bit less then my previous setup so I should have very little to no rubbing when flexed out
300 bucks and they're yours if your in the Mansfield texas area! The 4th isn't in the frame so your seeing 3
Had too cause my old of wheels and tires were bad/kinda bald
Anyways here's some shots with no hood still and it will remain with no hood cause I'm lazy since I'm gonna be rebuilding my motor......yeah that's a good excuse
these are Dextero DAT1 31x10.5r15s on some Nomdad convoy wheels,got the tires balanced and installed for 420
(hehe 420) first 90 ish miles today and they feel great,they're an At so they are nice and quiet track straight going 95 and they're cheap ! Once i rebuild my motor I'll see how they do out in the rocks at Bridgeport Ohv !And here's a view from Uptop and im loving the offset of these,they poke out a bit less then my previous setup so I should have very little to no rubbing when flexed out
300 bucks and they're yours if your in the Mansfield texas area! The 4th isn't in the frame so your seeing 3
Now that I have the 98 Impreza running, I started with a small project on the LJ. I replaced valve cover gasket, oil pan gasket, and RMS a while ago, but I had a bad leak from the RMS area afterwards. I pulled the oil pan, and I don’t know how I flaked out (probably just old age!), but I didn’t put RTV on the corners on either side of the rear crank journal. If anyone’s wondering, yes, that RTV is important!
After that, I took the front console off. Since putting in the motor mount lift, the shifter hits the rear of the console window. This will soon be rectified when I install the Atlas and tummy tuck, but I need to get this LJ inspected very soon in order to renew the registration this year before I start the big build project. With the front console and lower shift boot off, I can shift it in order to drive to an inspector!
I can’t believe I’m finally starting in on the LJ build!
After that, I took the front console off. Since putting in the motor mount lift, the shifter hits the rear of the console window. This will soon be rectified when I install the Atlas and tummy tuck, but I need to get this LJ inspected very soon in order to renew the registration this year before I start the big build project. With the front console and lower shift boot off, I can shift it in order to drive to an inspector!
I can’t believe I’m finally starting in on the LJ build!
Modified my CA bracket out on the trail
Yep it’s holding air thankfully! 6-ply just isn’t gonna cut it anymore I don’t think.
Our jeeps took a beating today
Yep it’s holding air thankfully! 6-ply just isn’t gonna cut it anymore I don’t think.
Our jeeps took a beating today
View attachment 506123
A mostly stock MF'n Rubicon doing the MF'n Terminators?!!! Hell Yeah Brother!
Me an my son went to Southington Off Road Park in Ohio. This is reinstalling the rear spring for the second time yesterday
Bump stops, extended brake lines and rear lower spring retainers are on the list before next ride
Bump stops, extended brake lines and rear lower spring retainers are on the list before next ride
None.....i wonder why
Engine rebuild?.......Nah new wheels and tires
Had too cause my old of wheels and tires were bad/kinda bald
Anyways here's some shots with no hood still and it will remain with no hood cause I'm lazy since I'm gonna be rebuilding my motor......yeah that's a good excuse
these are Dextero DAT1 31x10.5r15s on some Nomdad convoy wheels,got the tires balanced and installed for 420
View attachment 506014
View attachment 506015
View attachment 506018
And here's a view from Uptop and im loving the offset of these,they poke out a bit less then my previous setup so I should have very little to no rubbing when flexed out
View attachment 506019
300 bucks and they're yours if your in the Mansfield texas area! The 4th isn't in the frame so your seeing 3
What are the new wheels, where did you get them? I like 'em!
My son got me the same ones 2 years ago and they are now starting to rust.
Took care of the surface rust at the back of the frame. Andy
