2004 LJ In Flux

[The4bangertj]

Flush mount KC cyclones work well and look a lot better than Berrys jk lights.

View attachment 683526

That is also a really solid option and imo better looking than the circle lights and would match my Baja headlights look better.
I love this forum, yall are awesome.
Love this idea sharing so hopefully others got something and not just me. I’ll see how flux ends up using his feniex lights but I might forgo a side marker. I just checked and both my side markers in the stock flare haven’t been plugged in for a very very long time. Like a few years. Realized it passed inspection with them unplugged too so just some bigger brighter than 3/4inch front ones is what I’ll prob be going with.

 

[06TJ35's]

My A pillar lights have a amber halo that is tied into my turn signals.

What lights are those?

Just these as turn signals should be good enough for me.

 

[Fluxor]

What lights are those?

Just these as turn signals should be good enough for me.

Baja Designs knock off amazon lights. They work OK for my use. We don't really have any wide open spaces that super bright lights work well in the south east. I just wanted amber trail lights and they earned the $100 entry fee. There are a number of knock offs and they all vary all the time so I am not at all saying whatever lights you get will yield similar results. Its a gamble at best. There are a number of A pillar lights that have the amber halo feature that can be used for a turn signal. If you need A pillar brackets I know a guy lol.

 

[The4bangertj]

In my search for turn signals I came across LED turn signal strips but they wont be durable


View: %5BURL%5D%5BURL%5D%5BURL%5Dhttps://m.youtube.com/watch?v=UrYpAuXJfKk&pp=ygUVTGVkIHR1cm4gc2lnbmFsIHN0cmlw[/URL][/URL][/URL]


I’m also wondering if the DRL on my Baja LP6 can act as turn signals to

View attachment 683382

Forgot to reply to this. I have the dot lp6 installed. Functionally yes you can run it as a turn signal as a 2 wire not 3 (it would only be on when signaling and not as a running light and turn) but Baja designs says legally it’s not a turn signal and should only be a running light. So that’s what I did. You probably could get away with it but since it’s in the headlight and small I’d still prefer another stand alone light since you still need another light as running lights if you turned it into a turn signal light.

 

[Fluxor]

Forgot to reply to this. I have the dot lp6 installed. Functionally yes you can run it as a turn signal as a 2 wire not 3 (it would only be on when signaling and not as a running light and turn) but Baja designs says legally it’s not a turn signal and should only be a running light. So that’s what I did. You probably could get away with it but since it’s in the headlight and small I’d still prefer another stand alone light since you still need another light as running lights if you turned it into a turn signal light.

There is a way to wire them as switch back so they do both. They cant call them turn signals because they don't have reflective properties. I would be very surprised if law enforcement cares. Mine are not called turn signals either.

 

[06TJ35's]

There is a way to wire them as switch back so they do both. They cant call them turn signals because they don't have reflective properties. I would be very surprised if law enforcement cares. Mine are not called turn signals either.

View attachment 684241

View: https://m.youtube.com/watch?v=L397TWLwrUU&list=RDL397TWLwrUU&start_radio=1&pp=ygUdYnJlYWtpbmcgdGhlIGxhdyBqdWRhcyBwcmllc3SgBwE%3D

 

[RockyTopTJ]

There is a way to wire them as switch back so they do both. They cant call them turn signals because they don't have reflective properties. I would be very surprised if law enforcement cares. Mine are not called turn signals either.

View attachment 684241

I like to run a resistor (maybe 330-1000ohm depending on what you want) from the running light + and 2 diodes, one from the running light + and one from turn signal +. Both hooked into the positive side of the light. This allows the light to flash from bright to dim instead of on to off. Looks better imo.

 

[Fluxor]

First batch of LJ corner guard rub rails are being picked up today from the machine shop. I will bend, DA, box and start shipping orders next week. TJ's are next in line.