Anyone know what else i can do to remove this?

[Brad W]

I have tried everything. This is literally the only thing stopping me from getting back on the road.

 

[mrblaine]

I have tried everything. This is literally the only thing stopping me from getting back on the road.

View attachment 107618

Quality vise grips should do it.

 

[Ehallspqr]

Can you get a big Vise-grip on it? I’ve removed buggered up panhead screws that way. If you cut the head off with a cutting wheel could you grip the shank?

 

[Brad W]

Quality vise grips should do it.

I'll give it a shot.

 

[Brad W]

Can you get a big Vise-grip on it? I’ve removed buggered up panhead screws that way. If you cut the head off with a cutting wheel could you grip the shank?

I'll try that, I'll cut it so there is a bit to grab onto.

 

[Ehallspqr]

It’s worth a try. Nice new Vise grips with sharp teeth, grip down hard on that baby. Hit it with some PB blaster first and let it soak. Good idea to grind some flats. Good luck

 

[Brad W]

I got it off. The head unfortunately blew apart.

 

[mrblaine]

I got it off. The head unfortunately blew apart.

View attachment 107634

There are lots of ways to tackle that and I can screw up most of them. At this point, I'd just snag another mode shift fork and toss that in rather than dick with it.

 

[Brad W]

There are lots of ways to tackle that and I can screw up most of them. At this point, I'd just snag another mode shift fork and toss that in rather than dick with it.

Yeah I'll have to take it all apart and get a new one. Hopefully I dont mess up taking it apart.

 

[Vinman]

I would try welding a nut over whats left of the bolt before pulling the case apart (assuming the case has to be split to replace it)

 

[Brad W]

What is the fork replacement? I cant find the one for the NV241OR transfercase. Could I upgrade the T-case to and Atlas. I have an automatic?