Canadian 2003 TJ: assembly required!

[cdnwillyg]

The airbag issue is probably the clock spring

I don't think so as the horn is working well and the fact it clears monetarily before it comes back on. The SRS module was loose in a box so I'm thinking it needs to be reset from being bounced around??? Going to power it all down and check the connections first, then see if a code reader will tell me what's up?

 

[Mike_H]

I don't think so as the horn is working well and the fact it clears monetarily before it comes back on. The SRS module was loose in a box so I'm thinking it needs to be reset from being bounced around??? Going to power it all down and check the connections first, then see if a code reader will tell me what's up?

The horn is a seperate circuit from the airbag, so while it may not be the clockspring, don't dismiss it just because the horn works.

 

[cdnwillyg]

The horn is a seperate circuit from the airbag, so while it may not be the clockspring, don't dismiss it just because the horn works.

Will do thanks for the input! Is there away to test the clock spring? I know they say not to test the bag wiring as it may set it off?

 

[cdnwillyg]

I got the SRS module read and it looks like the passenger squib is my issue on the airbag light. Need to check connections again, not sure what else it could be ??

 

[cdnwillyg]

Well it appears you need to connect the passenger air bag when you put back the dash. All good now!!