I kind of have a CJ5/7 but its a Fiero on a CJ chassis with a Chevy 4.3 with a boat carb and TH350 that I picked up a few weekends ago. The steering shaft angle is too much for the stock steering coupler at the steering box. It keeps popping the retainer out when I steer. Does any one know where to get a double u-joint that will replace the stock steering coupler? I know its a 13/16x36 at the box but its a round at the end of the shaft. Is there something where I can use the pin that the block pieces go on to press through the joint. I dont know CJs so dont know where to look. I would rather not weld on a steering u joint for future serviceability.