Coil spring question

[CasperLLY]

This summer I put new Oem rear coil springs on my jeep. I still have the original front coils. Do I need new front springs to get it to sit level. I also have an 1.5 spring spacers in the front

Sent from my SM-G950U using Tapatalk

 

[Rob5589]

Probably. Measure the spring without the spacer and see where you are, 12" is stock.

 

[CasperLLY]

12 inch with the load or relaxed

Sent from my SM-G950U using Tapatalk

 

[Rob5589]

12 inch with the load or relaxed

Sent from my SM-G950U using Tapatalk

Hmmm. How tall are the rears, 8" is stock.

 

[CasperLLY]

I'll measure them both when I get home

Sent from my SM-G950U using Tapatalk

 

[JMT]

Level is what looks level to me.

 

[CasperLLY]

Level is what looks level to me.

I agree and it doesn't look level to me. Lol

Sent from my SM-G950U using Tapatalk

 

[CasperLLY]

About 11 1/2 up front and 9 in the back

Sent from my SM-G950U using Tapatalk

 

[glwood]

About 11 1/2 up front and 9 in the back

Sent from my SM-G950U using Tapatalk

Based on that, you've got 1" lift in the back, and 1/2" sag in the front. Difference of 1.5" between front and rear. You'd have more sag in the front without the spring spacer.

Where'd you get the OEM rear springs? Maybe check out a set of H&R front springs?

 

[CasperLLY]

I've been trying to remember all day so I could get front from the same place

Sent from my SM-G950U using Tapatalk

 

[CasperLLY]

Finally found it. Got them on ebay

Sent from my SM-G950U using Tapatalk

 

[CasperLLY]

Think I'll just put an OME 2.5 HD springs all the way around it

Sent from my SM-G950U using Tapatalk