Well received. thank you for your help [emoji6]I agree, looks like this engine should work. Ideally you should buy that engine, and use it as a donor to your engine. The 4.0 stroker websites have a lot of information regarding the different year blocks,heads,etc. and which are the best. This is a good website: http://www.angelfire.com/my/fan/stroker.html
For example take the block from this donor engine, use the head from your old engine (inspect it first obviously) because the head from newer jeep engines is typically better. I recommend doing new crank/cam bearings, new camshaft, freshen up the engine while you have it out. New lifters on the head, definitely. New oil pump, new water pump - The old engine blew up for a reason. Check all your piston rods and balance them, since the piston was damaged. Maybe take the pistons and rods from the donor engine. Otherwise keep as much as you can from your jeep's engine since the sensors and electrical will match right back up easily.
If you can get the replacement parts to freshen up this engine where you are, then a fully rebuilt 4.0 will last you until the jeep falls apart. Also make sure you have a guy doing the rebuild who understands engines! The 4.0 is not a very complicated engine.
Envoyé de mon MHA-L29 en utilisant Tapatalk