I have a spring isolator question

[kanur]

When I bought this TJ last fall it had a BB on it, 2" spacers on the springs. I replaced them with an OME 2 inch lift with springs and shocks.

The springs I removed only had the pucks and no original isolators. I installed the OME springs with the 10mm poly spacers only. My question is: is should this set up use the oem spacers too?

 

[Chris]

You can use the spacers or not, that's entirely up to you. Some people use them, while others do not.

 

[meangreen98]

I used the OEM isolators when i was running a coil spacer and I did the same running the OME lift.
Should look look like this.

 

[jjvw]

I used the OEM isolators when i was running a coil spacer and I did the same running the OME lift.
Should look look like this.

View attachment 161607

Mine were flip flopped. It works the same.

 

[meangreen98]

Mine were flip flopped. It works the same.

Same here, that's just a photo I took from quadratec to show.

 

[kanur]

Thanks Guys. I'm going to add one to the front to take out a little more rake.