Locker pump replacement

[No.343]

I think I ruined the rear locker pump. The input line nozzle felt loose when I installed it. Where is the best place to get a replacement. Thanks.

 

[AMS417]

I think I ruined the rear locker pump. The input line nozzle felt loose when I installed it. Where is the best place to get a replacement. Thanks.

If the pump still runs, you could probably fix it with epoxy and be good to go. Or search for used. Does not look like OE is available from what I see on dealer sites.


Found one on ebay:

https://rover.ebay.com/rover/1/711-...0001&campid=5337789113&icep_item=402108414552

 

[No.343]

If the pump still runs, you could probably fix it with epoxy and be good to go. Or search for used. Does not look like OE is available from what I see on dealer sites.


Found one on ebay:

https://rover.ebay.com/rover/1/711-...0001&campid=5337789113&icep_item=402108414552

They are proud of those things. I need to start looking at Ebay. I never think to look there. Thanks.

 

[Daryl]

Go to a wrecking yard and pull one from any of the following vehicles. Reuse the connector off your old pump.

Chevy Tracker all models 4wd 99 – 04 Suzuki Vitara, Grand Vitara XL, KIA Sorento, Kia Borrego, Kia Mohave, Kia BONGO MITUSBISHI Montero, L200, TRITON, SPORTERO, STRADA, PAJERO, MONTERO SPORT, NATIVA 1997 – 2012, CHALLENGER 2010, Shogun Pajero Jeep Rubicon.

 

[No.343]

Go to a wrecking yard and pull one from any of the following vehicles. Reuse the connector off your old pump.

Chevy Tracker all models 4wd 99 – 04 Suzuki Vitara, Grand Vitara XL, KIA Sorento, Kia Borrego, Kia Mohave, Kia BONGO MITUSBISHI Montero, L200, TRITON, SPORTERO, STRADA, PAJERO, MONTERO SPORT, NATIVA 1997 – 2012, CHALLENGER 2010, Shogun Pajero Jeep Rubicon.

Thanks.
Do they have the same bolt pattern for mounting them?

 

[Daryl]

Thanks.
Do they have the same bolt pattern for mounting them?

Yup

 

[jjvw]

Sleeve the break with some thin brass tube

 

[No.343]

I will try the brass tube. The epoxy didn't work. Thanks

 

[jjvw]

I will try the brass tube. The epoxy didn't work. Thanks

You'll need both