Misfire possibly caused by timing chain issue

Rusty Rivets

Member
Original poster
Joined
Mar 12, 2019
Messages
27
Location
West Tennessee
Would a lose or stretched timing chain cause a misfire in cylinder 1? I have a 2002 Jeep tj sport. The engine makes a slight rattle noise.
 
Check the chain, it takes two minutes, then you can move on to finding the problem. Put wrench on the crankshaft and turn it back and forth, if the chain is worn enough you will hear and feel the slack before it starts moving the cam. Mine was toast and I did not get a code. It did make noise and caused a rough idle.
 
  • Like
Reactions: Rusty Rivets
Check the chain, it takes two minutes, then you can move on to finding the problem. Put wrench on the crankshaft and turn it back and forth, if the chain is worn enough you will hear and feel the slack before it starts moving the cam. Mine was toast and I did not get a code. It did make noise and caused a rough idle.
Thank you kindly, I’m going to do this.