More updates. After doing some measuring after the dry fitting to make sure the 241 and 241 input and output shafts would work I noticed that on a 32RH the output shaft seal is too far into the transmission and 241 shaft isn’t long enough to even touch it. After a quick message to @mrblaine and @Irun I’m back in business with a seal extension from Teraflex.
If anyone is doing this swap with the 32RH you will need Teraflex part number 2904400.
https://www.quadratec.com/products/52254_107.htm
If anyone is doing this swap with the 32RH you will need Teraflex part number 2904400.
https://www.quadratec.com/products/52254_107.htm