Sway bar disconnect torque specs?

[dimension12]

Have the pin type and the pin holes were slots in bar and end. Bushings loose too. Used a torch and melted the bar to the ends for temp.
Also discovered track bar to frame bolt was loose. Used a 1/2” breaker bar and tightened til slop was gone. Will have to look up torque spec unless somebody rememberes and will share.

 

[tworley]

60 ft/lbs frame side and 40ft/lbs axle.

 

[dimension12]

Thank you very much. I tightened it plenty. I will put a torque wrench on both ends to double check over the weekend.

That explains why it was all over the place on windy days.