Looking for sway bar disconnect options

[Powdermonkey]

Well I am running as set of used spring until I swap axles, they measure right at 3.5" Eventually I will do the synergy or Currie 4" springs.

I have a set of curries NIB too

 

[Powdermonkey]

Relocating spring bracket? Got that too? I have looked into the return policy yet

 

[astjp2]

I will be relocating the rear uppers buckets, it will be a bitch to install the front 12" shocks though, I will have to cut the front fenders out to get them to clear. It will at least get me to fix my spot welder fixed to make a metal cover...that will bolt to the fenders to keep the mud out.

 

[astjp2]

Well I ordered the Zone rear links, mml and BL, cost was the same to ship 1 item as it was 3, so now I have more to add to the pile of parts.

 

[TreverStevens]

I think I have an old set of jks around. Pay for shipping and you can have them if I can find them.

What size of lift are your JKS for? might take you up on it if your disconnects work with my 4".

 

[astjp2]

What size of lift are your JKS for? might take you up on it if your disconnects work with my 4".

I have already claimed them...they should work for me too.

 

[SgtMajor138]

I think I have an old set of jks around. Pay for shipping and you can have them if I can find them.

If astjp2 does not want these, please let me know. Shipping should not be too bad, right? ;-)

 

[Powdermonkey]

If astjp2 does not want these, please let me know. Shipping should not be too bad, right? ;-)

Already shipped them, sorry.

 

[SkunkApe]

Find some decent extended links and then make these pins for under $15...

View attachment 84288
https://www.jeep forum.com/forum/f9/diy-quick-disconnect-pins-bolted-1415746/?amp=1

I ran these for a couple years before the Antirock. They did everything they needed to do and they stayed tight and secure for the 20k miles I had them.

I’m still pretty new to this. I have a stock LJ so I’m wondering if I can use this with the original sway bars?

 

[jjvw]

I’m still pretty new to this. I have a stock LJ so I’m wondering if I can use this with the original sway bars?

I used those pins on the factory front sway bar.