Looking for cordless impact wrench suggestions

I agree with Blaine that the m18 fuel 3/8s is the most versatile for “light duty” work... aka cars and jeeps.

Sounds like that would do the trick then. I'm not a mechanic as a profession, just like to be able to do everything I can myself and an impact would certainly make that a lot easier. I'm very tired of removing bolts entirely by hand.
 
Someday I’ll add some M18’s. If I did what you do I’d likely already have them.
Don't. Same advice I give to all semi-serious folks who are just looking for something to get by. If you buy one M18 Fuel in something you use often, that starts you down a road there is no coming back from.

My neighbor/packaging guy is a retired carpenter. He sold off all his air stuff and big corded electric tools when he retired. He picked up a homeowner special Porter Cable 20 volt set up. It is at the lower end of okay for homeowner shit and he was kinda okay with it since he didn't use it much. He watched me using my Milwaukee stuff, he knows tools and was impressed. Asked me should he buy some and I told him the same. Don't start down that road. He ignored me. Now he has almost as many as I do and quite a few I don't. He likes lights and yard tools. I need a few lights and I hate yard work.
 
When you do decide check tooltopia.com for pricing as I’ve gotten good deals there.
 
  • Like
Reactions: Chris
I'm pretty sure you ain't picking up what I'm putting down. Certain of it.

Based on what I've been reading since this response, I can tell that this is the way to go, with a M12 3/8".

I'm glad I asked first, because it's clear now that that M18 would be more power than I'd likely ever need.
 
Sounds like that would do the trick then. I'm not a mechanic as a profession, just like to be able to do everything I can myself and an impact would certainly make that a lot easier. I'm very tired of removing bolts entirely by hand.
Get the 3/8" impact in M18 Fuel. Add the 1/2" big boy tool only at a later date. Those 2 will do 99.9% of anything you want. If you get frisky, add the M12 Fuel right angle impact since it seriously kicks ass. Then get the M12 3/8" ratchet. If you find some money, get the 1/4" since it has a smaller head for tighter spots and has the same power as the 3/8".

Show me a picture of you owning the M12 Fuel anything and I'll give you the M12 Stubby since I hardly use it.
 
Don't. Same advice I give to all semi-serious folks who are just looking for something to get by. If you buy one M18 Fuel in something you use often, that starts you down a road there is no coming back from.

My neighbor/packaging guy is a retired carpenter. He sold off all his air stuff and big corded electric tools when he retired. He picked up a homeowner special Porter Cable 20 volt set up. It is at the lower end of okay for homeowner shit and he was kinda okay with it since he didn't use it much. He watched me using my Milwaukee stuff, he knows tools and was impressed. Asked me should he buy some and I told him the same. Don't start down that road. He ignored me. Now he has almost as many as I do and quite a few I don't. He likes lights and yard tools. I need a few lights and I hate yard work.
Ha, still want some m18 stuff.
 
  • Haha
Reactions: Chris
Based on what I've been reading since this response, I can tell that this is the way to go, with a M12 3/8".

I'm glad I asked first, because it's clear now that that M18 would be more power than I'd likely ever need.
No, you want the M18 Fuel 3/8" Impact. Start there.
 
Get the 3/8" impact in M18 Fuel. Add the 1/2" big boy tool only at a later date. Those 2 will do 99.9% of anything you want. If you get frisky, add the M12 Fuel right angle impact since it seriously kicks ass. Then get the M12 3/8" ratchet. If you find some money, get the 1/4" since it has a smaller head for tighter spots and has the same power as the 3/8".

Show me a picture of you owning the M12 Fuel anything and I'll give you the M12 Stubby since I hardly use it.
I do love my M12 3/8 ratchet
 
Sounds like that would do the trick then. I'm not a mechanic as a profession, just like to be able to do everything I can myself and an impact would certainly make that a lot easier. I'm very tired of removing bolts entirely by hand.

You can turn the torque down to suit lighter duty work.
 
  • Like
Reactions: Chris
No, you want M18 Fuel only and M12 Fuel only in anything that matters. I'm telling not to do it right now. It doesn't stop.
Sorry fuel was implied all my stuff is and will be fuel.
 
I have the M18 Fuel 1/4" right angle which is a fantastic for most anything under the hood and the DeWalt you posted originally which handles just about everything else, love them both.
 
  • Like
Reactions: Chris
Okay, M18 Fuel 3/8" it is.

This one has 600 ft/lbs. of torque:

https://www.homedepot.com/p/Milwauk...-Ring-W-2-2-0Ah-Batteries-2852-22CT/305535651
This one has 210 ft/lbs.

https://www.homedepot.com/p/Milwauk...g-Kit-W-2-2-0Ah-Batteries-2754-22CT/206320077
Both M18, both 3/8", but clearly very different.

The first one is the one to go with?
No, at a later date, get the first one in 1/2". Get the second one first. When they show up with those shitty batteries, sell them on OfferUp and get some real batteries.
 
  • Like
Reactions: MarvinL and Chris
It is a very important distinction since Milwaukee makes at least 3 levels of tool. Regular, brushless, and Fuel. They are not interchangeable.
Agreed, just didn’t think about it
 
It is a very important distinction since Milwaukee makes at least 3 levels of tool. Regular, brushless, and Fuel. They are not interchangeable.
Is this a fourth level of tool? The rare Fuel Brushless?

IMG_5777.webp