TNHEADDUCK
Reaction score
332

Joined
Last seen

Latest activity Postings Images About

    • TNHEADDUCK
      I literally use my Ranger everyday on my farm for something, I used to have a Samurai that I used as a farm chore vehicle. While it was...
    • TNHEADDUCK
      Is any of the threaded part of the bolt in J J ? I buy my bolts long enough that there are no threads in the joint then cut them to the...
    • TNHEADDUCK
      TNHEADDUCK reacted to mrblaine's post in the thread All things welding with Like Like.
      You have to watch the puddle because you aren't a robot so you need something that tells you that the feed rate of your electrode, build...
    • TNHEADDUCK
      TNHEADDUCK replied to the thread Smudge pot.
      There are several nurseries and orchards about 60 miles or so from where I live, I purchased it from one of them. It looks alot like the...
    • TNHEADDUCK
      TNHEADDUCK replied to the thread Smudge pot.
      I have one and only burn off road diesel in it (the smoke is minimal), mine has a diffuser about 18 inches over the exhaust port that...
    • TNHEADDUCK
      TNHEADDUCK reacted to mrblaine's post in the thread All things welding with Like Like.
      Hood time yes, but hood time with the intent to develop good habits that stay with you. There are a few things that are a problem that...
    • TNHEADDUCK
      TNHEADDUCK replied to the thread All things welding.
      The vast majority start with some bullshit cursive e or some other fucked up alphabet welding . This should be quote of the week !!!!!!
    • TNHEADDUCK
      TNHEADDUCK reacted to mrblaine's post in the thread All things welding with Like Like.
      Uttered by every beginning welder ever. The problem with weaves and patterns is beginners use them under the erroneous premise that they...
    • TNHEADDUCK
      Not yet, been trying to. It's being a Jeep. Gonna pull the trans this weekend and finish it up hopefully.
    • TNHEADDUCK
      Did you ever get your transmission stabbed to the engine? Did you find any issues with anything?
    • TNHEADDUCK
      TNHEADDUCK reacted to HenikonLJ's post in the thread Atlas 4-speed gearing with Like Like.
      I know my axle gears are not correct but that's not my current issue. The 4-1 is to low and 1-1 is to high I need something in between...
    • TNHEADDUCK
      TNHEADDUCK replied to the thread Atlas 4-speed gearing.
      The 3.8:1 4 speed Atlas would probably work, you will have to do some driveshaft modifications. I run a 3.8:1 2 speed Atlas behind a...
    • TNHEADDUCK
      Replaced some axle U-joints on my buddies 92 Dodge 3/4 ton, they fought every inch of the way!!!!!
    • TNHEADDUCK
      TNHEADDUCK reacted to Jerry Bransford's post in the thread Battery gunk with Like Like.
      Run an AGM battery, which is sealed, or clean then spray the battery connections with the above recommended battery connector protectant...
    • TNHEADDUCK
      TNHEADDUCK replied to the thread Battery gunk.
      When I put the battery/cable sealant on I shoot a little on the top of the battery to lay the penny on, 30 or so years ago I used...
  • Loading…
  • Loading…
  • Loading…