B00mb00m
The Church of Cutting Brakes of Atlas-Front Digs
Supporting Member
Ride of the Month Winner
Haha well alright, I'll keep the pictures coming I still have about 3 months of trials and tribulations to document lol.Absolutely, I’m planning for poly towers front and rear. It hard to see it in the closet but right now my Forest Service job has me renting (got relocated) without a garage - it’s really too bad I can’t run my welder in the parking lot For now I’m just vicariously living through your build
At this phase I did the pull everything, paint, reassemble and .... Cycle. Once everything was bolted up cycled everything once again. Before moving to fenders I wanted to get all the power steering lines ran which means I had to mount a cooler. I have already pulled the radiator three times now I once replaced the radiator, then added a transmission cooler with aux filter with temp sending unit then pulled again to put a bigger cooler! The problem is when I'm going 25mph up steep long logging road hills and the torque converter slips the trans will heat up. I stop or switch to 4LO when it gets to 225. Unfortunately even the largest cooler on Amazon isn't enough. As long as my Tc Is locked it's no problem so I run in 4lo or 2lo.
Anyhow I was not stoked to pull the radiator again so when I saw this cooler from Howe I was stoked. I was able to weld on the mounts in through the grille without removing radiator.