2004 LJ In Flux

[Fluxor]

Yes, I should have pictures soon.

 

[Camdenst]

Is there enough width on the back bumper for a pint glass haha.

 

[Fluxor]

Lol uh no don’t think so. You could on the hitch with the tailgate open!!!!

 

[srimes]

Ima drop this here and run away

 

[Camdenst]

Ima drop this here and run away


View attachment 575667

That’s awful hahahaha.

 

[John Cooper]

That’s awful hahahaha.

Nope it's the stupidest thing out there.

 

[Irun]

Nope it's the stupidest thing out there.

There are worse and more intrusive things out there!

 

[srimes]

That’s awful hahahaha.

I would hold a beer though

 

[John Cooper]

There are worse and more intrusive things out there!

View attachment 575690

Touche brother!!

 

[John Cooper]

I would hold a beer though

But why, puts the beer out there for some vagrant to steel.....

 

[TJY2K]

I did get the rear bumper shell made. I have all the parts to test everything now I just need time. Lol seems in short supply these days. I need to have a buddy 3d print the soft shackle mounts to make sure everything will work as planed.

View attachment 575495

HELL YES! Im excited to match my front Flux bumper! Which also means the tire carrier and hinges lol.

 

[06TJ35's]

HELL YES! Im excited to match my front Flux bumper! Which also means the tire carrier and hinges lol.

x2

 

[Fluxor]

Having a friend print the soft shackle prototypes. Hope to have it in for jeeptoberfest this Saturday. If anyone is going make sure to swing by the booth.

 

[Fluxor]

3D printed soft shackle fits well. All the brackets and critical things fit. I missed some holes and need to add a few for access to the inner rash guard bolt. The break press operator got a little carried away and over bent the top edge by 2.5 degrees and the lower by 1. I’m going to get another shell and stiffener cut and hopefully dialed in the break program. But it’s getting closer!

 

[Blake Stamper]

View attachment 577127View attachment 577128
3D printed soft shackle fits well. All the brackets and critical things fit. I missed some holes and need to add a few for access to the inner rash guard bolt. The break press operator got a little carried away and over bent the top edge by 2.5 degrees and the lower by 1. I’m going to get another shell and stiffener cut and hopefully dialed in the break program. But it’s getting closer!

Sounds like the perfect bumper for me ..

 

[Camdenst]

That looks amazing, how wide is it? I worry about the LJs rear corners.

 

[Fluxor]

That looks amazing, how wide is it? I worry about the LJs rear corners.

I will get some 'on view" pictures this weekend. I am thrashing after work to get orders out and get ready for a local jeep event.

 

[D's Jeep Wrld]

Ahhh yes....looks like I need to spend some more money I don't have
Once that new design is available,My grubby little hands will get one of them later on

 

[NashvilleTJ]

View attachment 577127View attachment 577128
3D printed soft shackle fits well. All the brackets and critical things fit. I missed some holes and need to add a few for access to the inner rash guard bolt. The break press operator got a little carried away and over bent the top edge by 2.5 degrees and the lower by 1. I’m going to get another shell and stiffener cut and hopefully dialed in the break program. But it’s getting closer!

Flux - You could market those as is to anyone running an LS. They would be plenty strong for that application.

 

[SoCalGlide]

View attachment 577127View attachment 577128
3D printed soft shackle fits well. All the brackets and critical things fit. I missed some holes and need to add a few for access to the inner rash guard bolt. The break press operator got a little carried away and over bent the top edge by 2.5 degrees and the lower by 1. I’m going to get another shell and stiffener cut and hopefully dialed in the break program. But it’s getting closer!

I'll be in my bunk.