Help Identifying Lift

Jamison C

Heil Savvy 🙋‍♂️
Original poster
Supporting Member
Ride of the Month Winner
Joined
Sep 1, 2018
Messages
3,602
Location
Sedona, AZ
So for awhile I’ve been curious about what size lift my Jeep sits on since the PO had it installed. I measured 14” for front springs and 9” for rear springs. Info on stock spring size is pretty vague. Picture is my Jeep sitting on 33” tires
C425BD9B-08F1-4738-A57C-16D6D78E29BA.webp
 
Oh and the shocks are skyjacker brand
 
Stock springs are 12 inches front, 8 inches rear. Spring only, not the isolators
 
  • Like
Reactions: jjvw
So I’m gonna guess that the lift is 2.5” and the little spacers compensate for what the springs lack?
 
So I’m gonna guess that the lift is 2.5” and the little spacers compensate for what the springs lack?
Your measurements suggest that your lift is 2" front, 1" rear. ;)
 
I have spacers too
3" in front and 1,5 "rear
2002 TJ 4.0 sport
It was the previous owner who installed the spacers.
But my question is can we use the same shoks (for example stock one) for 2 different coil lift sizes (in my car 3" in front and 1,5 " rear with the same stock shoks)...?
Can that dommage the shoks or the spring...?

Envoyé de mon MHA-L29 en utilisant Tapatalk