Thanks I found a junk yard that has the harness. I may just do that.
@Chris Did your silver TJ have the rear fog light?
Sorry man, the original post had pictures of a silver TJ so I assumed that was yours.
My TJ has the factory rear fog light.
The stalk has two pullout positions, the first does nothing and the second is the rear fog light.
I’m assuming the first is the front fog lights and hoping that its as simple as adding the lights and a relay and they’ll work.
I don’t have wiring in the inner guards but inside the engine bay on both guards I have the plugs pictured below.
Can anyone confirm those are the right plugs?
View attachment 44962
View attachment 44963
View attachment 44964
Here’s a picture of the factory rear fog light.
View attachment 44965
Ahhh, that's a European / Australian thing. None of the TJs in the U.S. ever came with those (or those twilights either). That has something to do with local laws. Vehicles in the U.S. aren't required to have a rear fog light.
Someone such as @Kiwi TJ or @Daz7 can hopefully confirm this, since they're from New Zealand and Australia.
Cheers Chris.
What's twilights?
Is your plug the same as what I have?
Out of interest, on your stalk when you pull the knob out to turn the fog lights on, it there a second indent? (can you pull it out further)?
I meant to say taillights, oops!
U.S. spec TJs have a different looking taillight. It's been a while since I looked at my taillight plug, so I can't comment on that 100%.
Nope, on my TJ you can only pull the knob out one time, there is no second indent. It sounds like that second indent on yours is supposed to turn on the rear fog, in which case, the stalk that comes on the Australian spec TJs must be a different part number than the U.S. spec one.
Mine has the plugs hanging under the front fender behind the front marker light. Just run wires from lights to plugs.Ok, odd question. I bought my 2000 Sahara used. It has the toggle switch for fog light but I can't see any wiring or a relay in the relay box. Anybody know of a way to wire up fog lights to the original switch. BTW, I don't have the connector/plug in Chris's first picture. Thanks if you know or can at least help. I work in electronics but can't find where the wires are going from the switch. Seems like it should be easy.
Kinda on topic.
Stock for lights are set up for 55watt from what I understand. Do you think the stock electrical could handle an upgrade to a 100watt set? I could go led, but I kinda dig the classic look of the halogen lights with a yellow lens film.
Cut the wire midway and add a splice.I have the silver TJ, and wanted to know if anyone found a good extension for the factory plug? I changed my bumpers and want to add back the fog lights but when I put the factory set back on the new bumper did not like the look. Want or must say have to have round fogs or it would not be a TJ, any recommendations for replacements? I know there are tons of options and you guys always have some great feedback. Thank you.
few pics added of the bumper and the female connector attached on the inside of each fender.
I have the silver TJ, and wanted to know if anyone found a good extension for the factory plug? I changed my bumpers and want to add back the fog lights but when I put the factory set back on the new bumper did not like the look. Want or must say have to have round fogs or it would not be a TJ, any recommendations for replacements? I know there are tons of options and you guys always have some great feedback. Thank you.
few pics added of the bumper and the female connector attached on the inside of each fender.