M100 jeep trailer

[Twopoint]

After putting an actual load in my M100, I found that the springs were so bad the were unusable.
I was able to find some springs at the Quad " Crown A612 Front Leaf Spring Assembly ." they actually fit perfectly, though they were a bit thicker. And because they were thicker I had to get some new U bolts " Crown J0909222 Front Leaf Spring U-Bolt " I will need to trim the length once I figure out how long I want them.

these will fit both the M100 and the M416 Jeep Trailers

 

[jeepins]

How about your shocks too? I have original springs in my 67 M416 and they're plenty strong still, i've had a ton of weight in that trailer before and for the heck of it even filled it up with water once just to see if the plugs will hold.

 

[Twopoint]

The previous owner put air shocks on it, I assume to put off buying the springs, but they are in very good shape.
the previous shocks were so bad if I stood in the back of the trailer, the springs were almost flat.

But on the bright side, they will make some very good knife blades!