"Pacing myself" build

Ok , this is how tight I am. Rather than spend $20 for a clean Ebay holder, I glued mine back together. First 2 attempts failed. 3rd one is holding. The glue was free, ha!
View attachment 117542View attachment 117543View attachment 117544
FTR I have a spare
62CACDC8-00A2-4EC5-9E22-876BE91064D1.webp
 
  • Like
Reactions: JMT and bobthetj03
Wish I could help your cheap a— out with my 933’s and go to 934’s, but I don’t have anything to gain by it. Hope you get them soon, undamaged!
 
  • Like
Reactions: bobthetj03
Wish I could help your cheap a— out with my 933’s and go to 934’s, but I don’t have anything to gain by it. Hope you get them soon, undamaged!

Just gonna have to pony up and get them.
 
  • Like
Reactions: JMT
Just gonna have to pony up and get them.
That’s the drill. I finally ponied up for a front lower control arm, all of $25, and an O2 sensor that’s been out for 3 months, another whopping $23
 
Adjusting sleeve showed up, so got the pieces ready to go. Will get it installed after work one night this week. I pressure washed under the chassis and will do my touch ups to all my Rubicon kisses as well.
20190930_112732.webp
 
Swapped out the tie rod last night. No pics cause I was pressed for time, but I took advantage of the flex while the tie rod was off to pull the front springs and swap my 0.75" spacers for 1.00" ones. I'm just not a fan of the factory rake that my new to me rear springs were giving me, so for now, this was a compromise. You wouldn't think 0.25" would make a difference, but it actually looks better. I'll post some stance pics tomorrow.
 
In an effort to keep the soft top on thru October, I needed to clean up the back window. I could barely see thru it to back up, so out came my detailing bag of goodies to see if I could see again. The side windows are too far gone, so not gonna worry about them. I'll have to break down and buy some new ones from Bestop when the money tree grows some more.
Before:
20191004_094446.webp

After:
20191004_124145.webp

20191004_124156.webp

20191004_124216.webp
 
In an effort to keep the soft top on thru October, I needed to clean up the back window. I could barely see thru it to back up, so out came my detailing bag of goodies to see if I could see again. The side windows are too far gone, so not gonna worry about them. I'll have to break down and buy some new ones from Bestop when the money tree grows some more.
Before:
View attachment 118428
After:
View attachment 118429
View attachment 118430
View attachment 118431
Wow that came out amazing. Well done sir.
 
  • Like
Reactions: bobthetj03