luk4mud
TJ Enthusiast
4 rigs/ 5 people, stayed at the far west end of Loon next to the stream. We thought the hardest part of the trail was the mile before Loon. Little and Big Sluice were not a huge deal with some spotting. HTH
California Rubicon Trail Run
- Thread starter DrDmoney
- Start date
Plenty of clearance with MC track bar. This is not all the way up but it will have no problem at full stuff with complete droop on the passenger side.
Looking good buddy! Playing around at PC I see. Tie rod looks close to hitting the TB, or is it the angle of the pic?
So I got my oil pan skid all set this Saturday ( driver side front didn’t fit cause I had the mount on backwards) but it’s all tits now.
Prepped my OME bumper and gave it a nice semi gloss rattle canned. I think I’m going to need to order 1/0 gauges before I hook up the winch
I don’t think my original cables will handle the 400 amps ?
What say y’all ?
Prepped my OME bumper and gave it a nice semi gloss rattle canned. I think I’m going to need to order 1/0 gauges before I hook up the winch
I don’t think my original cables will handle the 400 amps ?
What say y’all ?
So I got my oil pan skid all set this Saturday ( driver side front didn’t fit cause I had the mount on backwards) but it’s all tits now.
Prepped my OME bumper and gave it a nice semi gloss rattle canned. I think I’m going to need to order 1/0 gauges before I hook up the winch
I don’t think my original cables will handle the 400 amps ?
What say y’all ?
All the winches I’ve purchased came with 2ga cable. One was a Warn 8274, the other was a Warn 9.5TI.
My Warn M8000 takes standard cable gauge. Wire it up and don't look back. Run some loom to protect from chaffing between the grill and along the distribution panel to the battery.
OP
Spent most of the day trying to get my track bar to clear my diff cover.
pretty happy where it’s at now. I think the MetalCloak TB that @Indy installed would clear better. Also worked on squeezing a little more down travel out of my suspension.
Obligatory poser pics. I didn’t have a forklift to play with so I used the RTI (Rock Travel Index)
Looks like those 37’s will fit
This is where the old spring would bail out before.
pretty happy where it’s at now. I think the MetalCloak TB that @Indy installed would clear better. Also worked on squeezing a little more down travel out of my suspension.
Obligatory poser pics. I didn’t have a forklift to play with so I used the RTI (Rock Travel Index)
Looks like those 37’s will fit
This is where the old spring would bail out before.
Indy.....I was just wondering.... are you taking the "Hello Kitty" sleeping bag on this trip? Seems there is going to be a lot of scotch in camp.
Is a fire permit the only thing required, legally, for the trail beforehand?
http://www.preventwildfireca.org/Campfire-Permit/
http://www.preventwildfireca.org/Campfire-Permit/
OP
campfire permits are required but they are free and i just happen to have a contact for those.
OP
OP
they're only pricey if they don't work, priceless if they do
OP