STICKY Share Your 3D Design Files (or Sell a DIY Part)

Rubiconned said:
It takes the same cabin filter as a JK. The inventor created the modular version first and the files are free. He has since upgraded to a single piece version which he sells for $40 on eBay. I'm a cheap mofo so, I'll print the free version. But for those that want to buy the single piece the link is below. He also has a water shield for it, but he says it's not really necessary.

https://www.ebay.com/itm/1159138737...pid=5337789113&customid=&toolid=10001&mkevt=1

https://www.ebay.com/itm/1159898397...pid=5337789113&customid=&toolid=10001&mkevt=1
Click to expand...

My luck with printing stuff hasn't been great. I can't print it myself so I send it to the local library for pennies per minute. But I can't ask for specific type and everything I have had them do has eventually warped. I'll pay the $49
 
This site contains affiliate links for which Jeep Wrangler TJ Forum may be compensated.
MikekiM said:
My luck with printing stuff hasn't been great. I can't print it myself so I send it to the local library for pennies per minute. But I can't ask for specific type and everything I have had them do has eventually warped. I'll pay the $49
Click to expand...

The library is going to do it as cheap as possible so they're using PLA filament. PLA sucks outdoors. It's brittle and prone to warping in the heat.
 
  • Like
Reactions: MikekiM
DeltaNu1142 said:
I've had a winch solenoid mount I designed and printed in PETG under the hood of my F150 for probably 5 years/40,000 miles. Printed with regular infill (30%?). No issues.
Click to expand...

You can also get PETG with self extinguishing additives to help with fire prevention. It's a little harder to print but removes a fire fuel source.
 
Well, there is another way...

TJ Cabin Filter.jpg

🙄
 
  • Face Palm
  • USA Proud
Reactions: MikekiM and Apparition
Top Bottom
Back