Looks really good. Time to change your avatar pic now.Finally finished installing my zone lift. You guys are bad influences, I originally wanted to keep it close to stock View attachment 254796
Looks really good. Time to change your avatar pic now.Finally finished installing my zone lift. You guys are bad influences, I originally wanted to keep it close to stock View attachment 254796
They’re BF Goodrich KO2s. They have white raised on one side and black on the other. Not sure why the BFG mud terrains don’t have white letters.what product did you use to make the lettering on your tires white?
Yeah I’ll definitely fix it first, I’m hoping the bondo doesn’t go so far up that it makes it so I can’t bolt on sliders, it seemed to go up pretty high form the magnet test. And thanks!
The rails are "EX-1050-BLACK – 1″ X 0.5″ BLACK SMOOTH T-SLOTTED ALUMINUM EXTRUSION" from tnutz.com. You can buy them custom cut to length. Then I used "(DB-010-SS) DROP-IN T-NUT W/SPRING-BALL – STAINLESS" (also from tnutz) and some eye screws from amazon.What cargo rails did you buy? Haven't seen that style before
I’ll have to check it out more and see how far it goes. I don’t have any experience welding or a welder so I would have to pay to have it done, I’m wondering how much that would costIf possible I would cut it out and weld in a new piece.
Yeah definitely, took it out wheeling on a small local trail and grabbed a good shot for thatLooks really good. Time to change your avatar pic now.
What did you go with for the new third brake light, I’m thinking of getting a new one so i don’t have to lift my stock one up 2+ inches but can’t find any I likeInstalled a new track bar to get rid of the little shimmy. Think it did the trick. Replaced the bolt too (hard to see in this pic). I also got new tie rods, drag link and steering stabilizer to put in but might just keep them as spares for now. Rides good so why change it.
View attachment 254978
Autumn (Fall) here in NZ. Lots of leaves everywhere!
View attachment 254979
Some parts arrived today to keep me busy this weekend. New bulb for the under hood light, new wiper blades, and a new center cap for my spare wheel, I’ve got a round LED that I’m going to mount in the center cap to move my third brake light
You need the "ring of fire" like me. If someone runs into me now, I know that they're texting, vaping and drunk.What did you go with for the new third brake light, I’m thinking of getting a new one so i don’t have to lift my stock one up 2+ inches but can’t find any I like
Thank goodness you don't have an electric Jeep. If you did you would never be able to charge it since having to park in the street.Installed a new track bar to get rid of the little shimmy. Think it did the trick. Replaced the bolt too (hard to see in this pic). I also got new tie rods, drag link and steering stabilizer to put in but might just keep them as spares for now. Rides good so why change it.
View attachment 254978
Autumn (Fall) here in NZ. Lots of leaves everywhere!
View attachment 254979
Some parts arrived today to keep me busy this weekend. New bulb for the under hood light, new wiper blades, and a new center cap for my spare wheel, I’ve got a round LED that I’m going to mount in the center cap to move my third brake light
It is hard to tell from the close up photos but it looks like you are missing the plastic end caps from the stock bumper.
Can you tell me what brackets those are for the recovery points? I have been looking for something simple and those would work for me. Dis you have to drill the frame to mount them?
Thanks
What exactly is the "ring of fire"? Is this a home brew or did you get the basic kit off extreme terrain? Curious what you used cause that looks really good.You need the "ring of fire" like me. If someone runs into me now, I know that they're texting, vaping and drunk.
p.s. I've also done the $3 Tractor supply center hole light.
View attachment 254987
View attachment 254988
Ebay dual ring led light for $35. Google it for better prices. I've had mine for 4 years with zero issues.What exactly is the "ring of fire"? Is this a home brew or did you get the basic kit off extreme terrain? Curious what you used cause that looks really good.
Looks good. That MonstaLiner is good stuff; very durable. I covered a Dinoot trailer in it that I built.Just finished putting Monstaliner in the Jeep tub. I ended up putting four coats on the tub over about 24 hours.
This first pic is after I got all the seats, carpet, and center console out. Very dirty!
View attachment 255024
Here's the tub after two washes (one with Oxyclean and another with Dawn dishsoap) and then all scuffed up with a wool pad.
View attachment 255026
And here's the shot after two wipedowns with acetone and all the painter's tape in place.
View attachment 255033
And rather than show you each coat of Monstaliner, here's some after shots of the fourth and final coat.
View attachment 255029
View attachment 255030
View attachment 255031
I'm very happy with the quality of the coating from Monstaliner. The color is "Run Forrest Run". It's got a great texture and seems very sturdy. It took a while to do all the prep and then four coats, but it was worth it for a permanent coating which is easy to clean. No more ratty carpets!
Did you mean to quote someone?It is hard to tell from the close up photos but it looks like you are missing the plastic end caps from the stock bumper.
Can you tell me what brackets those are for the recovery points? I have been looking for something simple and those would work for me. Dis you have to drill the frame to mount them?
Thanks