Jeep Wrangler TJ LED Headlight Upgrade Options
- Thread starter Chris
- Start date
David Overbay
TJ Enthusiast
Negative. They plug and play into your existing harness. No wiring needed!
David Overbay
TJ Enthusiast
Travis
TJ Enthusiast
I am going to order the Lantsun 7" LED Headlights, that @Chris posted. Do these come with everything I'll need to swap the old ones out? I drove my Jeep out of town at night, what a terrible experiance. I won't do that again until I have these new headlights. How do I add the forum tag to the order? I definitely want to do that.
Nope, they literally plug right in. Easiest install you'll ever do. You'll be happy you did too, as you know, the factory lights are just garbage.
Any Amazon link that is posted on the forum automatically converts to have the tag at the end. So, just use the link in the original post, or this one:
http://www.amazon.com/dp/B015SL0MSK/?tag=wranglerorg-20
Travis
TJ Enthusiast
Thanks Chris! I must admit, I was truly scared the night we drove just 22 miles out of town. I tried the high beams and realized the passenger side light was out. The road we were traveling on was windy and had a lot of hills. It's normally a very nice ride in the daytime, but it was terrifying in the Jeep at night.
Travis
TJ Enthusiast
I can't wait. I have night blindness as it is, there probably should be a restriction on my license. If it's raining outside, driving anything is a no go for me. The glare off the road absolutely blinds me. It's a good thing my work is literally 2 minutes from my house.
When I click on any link for the Lantsun lights it takes me to ... I want to make sure that I order the right lights..Turbo Pair 7 Inch Round Black Led Headlight with DRL Hi/lo Beam for Jeep Wrangler Jk Tj Harley Davidson with H4 Plug H4-h13 Adapter
Those are the correct lights Mike.
They work on any vehicle with a 7" round headlight including Harley's and various other models.
Just so you're 100% sure, these are the right ones:
https://www.amazon.com/dp/B015SL0MSK/?tag=wranglerorg-20
That was quick! Thank you, so are these made by Lantsun? I keep reading about Lantsun but the link takes me to Turbo Marketing.. I new to owning a Jeep and the head lights are awful although I love everything else
That was quick! Thank you, so are these made by Lantsun? I keep reading about Lantsun but the link takes me to Turbo Marketing.. I new to owning a Jeep and the head lights are awful although I love everything else
They are made by Lantsun. Turbo Marketing is the company on Amazon who sells them.
Travis
TJ Enthusiast
Travis
TJ Enthusiast
Well, they have just arrived. They are beefy-er than I expected. Now for the install. I'm eargerly awaiting the hours of darkness today
Well, they have just arrived. They are beefy-er than I expected. Now for the install. I'm eargerly awaiting the hours of darkness today
View attachment 6373
Going from stock headlights to those, you'll be blown away!
Travis
TJ Enthusiast
Ok, well the install was a breeze but I have a couple questions. The old Sylvania lights had a plug directly on the light itself, the new ones have a cord with a connector, connected to the plug outside the light well. Do i have to worry about water getting to that? I taped and zip tied it to keep it tight, but should I wrap it in elecrical tape to keep the water out? Also, my passenger side bright light does not work, it didn't work on the original lamps either. That leads me to believe it's a problem with the Jeep & not the light itself. How do I figure out how to make the bright light work? I think it may take awhile to get used to the look, I guess I will see how they perform at night and use the mantra "function over fashion" if they don't grow on me. One more thing, how do I adjust them down? I don't want to blind oncoming traffic.
Low beams
High beams (passenger side low beam)
Low beams
High beams (passenger side low beam)
Similar threads
