I have one of those too. She's not very friendly, but kills rats, mice, rabbits, squirrels, birds, etc.
What did you do to your TJ today?
- Thread starter LJRubiconGuy
- Start date
I have one of those too. She's not very friendly, but kills rats, mice, rabbits, squirrels, birds, etc.
Running a new vac line is the best permanent option… but.. if you ever have a break again and need a quick fix, wire heat shrink tubing worked great for me!
Changed the oil, rotated tires, and Fluid Filmed the under side of my daughter's Jeep. She's ready for the winter.
Ordered myself a Christmas gift, new speakers for the dash and sound bar. Wife will wrap and put under the tree.
At this point, I would have to remove the dash and the heater box again which just isn't an option. Well, it is, but no, I don't want to go through that again right away. I'll take a look at a bandaid until I need to pull the heater box again which is hopefully a long time away.
Be sure to act surprised.
That's why I always do my online shopping when drunk. When it arrives, I'm always surprised.
Tuns and fodeez!
Well, quardaz and thuddy-wunz at least...
Well, quardaz and thuddy-wunz at least...
What is that strange texture across the face of your tires ?
That's for FL rock crawling. The old tires wouldn't cut it.
Well since @AndyG tire fiasco on the wheeling trip to Helen, GA. And me having a Harbor freight light he hasn't seen in almost 2 years.
Yes he left it in BB, and you would think, what I paid for the Jeep, the light would have been a gift to me.
No way, he saw it in my hand and lord have mercy he was squalling like a 2 year old
He embarrassed myself and @tr21triton so much we were really ashamed to introduce him to @RangerTJ
Well today I stopped by HF just to browse and BANG there it was the new improved version of the light @AndyG just couldn't live without!!!!! And still on Black Friday Sale of $19.99.
And even better it folds up!!!!!!!
Yes he left it in BB, and you would think, what I paid for the Jeep, the light would have been a gift to me.
No way, he saw it in my hand and lord have mercy he was squalling like a 2 year old
He embarrassed myself and @tr21triton so much we were really ashamed to introduce him to @RangerTJ
Well today I stopped by HF just to browse and BANG there it was the new improved version of the light @AndyG just couldn't live without!!!!! And still on Black Friday Sale of $19.99.
And even better it folds up!!!!!!!
Its obvious Boogie finds this picture inspirational, he had it near to hand to post!
Well since @AndyG tire fiasco on the wheeling trip to Helen, GA. And me having a Harbor freight light he hasn't seen in almost 2 years.
Yes he left it in BB, and you would think, what I paid for the Jeep, the light would have been a gift to me.
No way, he saw it in my hand and lord have mercy he was squalling like a 2 year old
He embarrassed myself and @tr21triton so much we were really ashamed to introduce him to @RangerTJ
Well today I stopped by HF just to browse and BANG there it was the new improved version of the light @AndyG just couldn't live without!!!!! And still on Black Friday Sale of $19.99.
View attachment 476798
And even better it folds up!!!!!!!
View attachment 476799
Might have to grab me one of them!!
Pantera99
TJ Enthusiast
Dead battery this morning but free replacement at O'Reillys, so while I had the hood propped up the whole way figured I'd finally get to the rear CCV valve. Cut out the old rubber step by step around & got her to pop out w/o dropping anything inside & actually didn't break the elbow off surprisingly. Had new Dorman rubber ends & the plastic tube portion still seemed good.
Do you have the part # for the rubber connector from the elbow to the plastic tube?
WV Native
Member
Didn't do anything to the Jeep today, but I'm changing the valve cover gasket on it tomorrow. After this is done, the only leaking fluids on the Jeep will be the rear main seal.
Edit- I most likely wont be doing the steering box upgrade, gotta cut the steering shaft which wouldn't be hard but factoring in the fact ill need a new pitman arm from the looks of it, PSC steering fluid, pump pulley for my psc pump and a reservoir for it and ECT, and im already beyond my "budget" so its a no go! Plus id like to add a cooler from Mr.Blaine so ill do all that once i buy his setup So ill keep suffering for now as far as steering goes when i go wheeling ...
But to scratch my itch i will pretty up the stock steering box while at it though
Well now that I'm back in town,I'm deeply considering replacing my steering box,it won't be another year or so until I run bigger tires so ive been keeping this thing on the backburner for the past few months
But since im already here.....I wanna just go in and upgrade since on 31s it struggles to steer,makes it stressful when being spotted and get told something around the lines of "PASSENGER DYLAN MORE PASSENGER!!! " like damn "IM GIVEN ER ALL SHE'S GOT HAS CAPTAIN
"
Apart from decisions I did an alright job of "bedlining" one fender before I get to "bodyworking & painting" the fenders as a whole
You can see where I got too far and to close but I'm not complaining since it's my first time working with that stuff...."it won't be seen"
So ill keep suffering for now as far as steering goes when i go wheeling ...But to scratch my itch i will pretty up the stock steering box while at it though
Well now that I'm back in town,I'm deeply considering replacing my steering box,it won't be another year or so until I run bigger tires so ive been keeping this thing on the backburner for the past few months
But since im already here.....I wanna just go in and upgrade since on 31s it struggles to steer,makes it stressful when being spotted and get told something around the lines of "PASSENGER DYLAN MORE PASSENGER!!! " like damn "IM GIVEN ER ALL SHE'S GOT HAS CAPTAIN
"Apart from decisions I did an alright job of "bedlining" one fender before I get to "bodyworking & painting" the fenders as a whole
You can see where I got too far and to close but I'm not complaining since it's my first time working with that stuff...."it won't be seen"
Last edited: