Search results

Here is the situation, I can smell a really strong raw fuel smell emanating from the driver side rear corner. no CEL no visible leaks I checked the fuel line to the rail, no leaks. Checked the rail and plugs not visible gas. No gas smell under the hood. Just very strong at the rear corner. I...

So I have this bad ass True 3 Door indoor/outdoor cooler that was used in retail. it is in great shape and runs perfectly. i picked it up about 2-3 years ago, because all the kids were living at home and it was great having a huge fridge in The garage to store food. Now the kids are moving out...

So my 03 just started sloppy shifting from 3–4. it gets hung up, and revs slightly higher before getting it into 4th. I recently changed out the TPS as I was getting g the voltage too high p0123, and upon pulling the tps I noticed the old sensor was a little crunchy. the replacement is a...

So the first one came out with much difficulty, finally got it out. Working on the second, it snapped off. Sucker is in there tight, I have the throttle body off and the map sensor off, applied heat, not joy. How do it get this off here? This sucks

Well? plenty of Gen Xrs and Boomers here, what say you? seems appropriate in todays climate crazy crazy world

Hey fellas, I have had this kit for a while and I am just now getting around to wiring these lights up. here is my issue, the loom for the relay looks to have been wired completely wrong and I can’t figure out what they are doing here. it came to me wired as such: red fused power from bat...

Ok so my track bar replacement fixed my wobble and cured my couple bouts of DW but I have a wobble or shake coming from the rear of the jeep after hitting bumps at speed. Nothing is felt in the steering wheel and the front end feels solid. Its a noisy wobble from the rear I am convinced. After...

I would love to upgrade but with bills and other priorities it is not in the budget at this time. I have a decent wobble in my steering when hitting bumps that can be exacerbated by steering wheel input, and I think I have it narrowed down to play in the track bar bushing. There is probably...

Ok so I had a CEL pop up today but the jeep is running fine. Volmeter looks good and steady at 14, shifts fine. Not missing, sputtering or anything. I will get a scantool on it later today, but thought I would see if any of you have had this. Ive not had a CEL pop before and not have ANY...

Looking for all three. Please let me know what you have in the thread or feel free to PM Thanks!

Well, looks like one of the seems may be giving up on my 03. I noticed a drip from the drain hole that appears to be coming from someplace above. Tried to tighten up the valve but it made zero difference. I am thinking the seem is beginning to leak. Any prefered rad on here these days? I hate...

Today while driving my 03’ the door chime started going off. No dummy light illuminated. if I slowed below a certain speed it would turn off. additionally the chime did not operate when the keys were left in the ignition and the door was opened with the jeep turned off. odd. Anyone seee this...

Hello all. I know most will say upgrade to ZJ v8 tie rod but I have limited cash right now. Anyone have part numbers for stock replacements both sides? Any suggestions? I just want the best possible (OEM) and closest to stock reliability. thanks!

Hi guys, Long time no post. Have any of you built a cart for your hardtop? Are you willing to share the dimensions with me? I think this fits my application better than a hoist or any of that stuff. I am trying to throw one together this week. I hope you and your families are all safe and...

I need to drop the plat to remove my front driveshaft for a rebuild. Got all but the drivers side tcase bolts loose (that one just spins grrr, but I'll deal with that later) and now I gotta drop the skid. I see I need to unbolt from the trans mount( I'll replace that while I'm in there) and...

Like most on here I have slight rusting on various parts under the hood. My goal is to clean everything up and get it back to as new looking as possible. Anyone have a tried and true procedure/ products for this? I have read everything from vacuuming dry to steam cleaning everything, I am...

Any builders out there? I’m moving into finishing 80% lowers and building ARs for my family. Anyone have any tips or links they would like to share or topics to talk about?

Hey all Today I installed my HD hinges, an install I have been dreading all winter. Must say it went without any real drama. I did snap a brand spanking new SK torx socket and it will be going back on Monday. My advice, grab a torch, a drill, a sharp 5/16 bit, good vice grips , a t40 socket...

My dash started to get rattled and noises so I dug in to investigate. It seems the two nuts for the center studs were omitted from the factory. They were never installed. I am thinking this may have contributed to the loosening of the dash. I read some other owner on this site found the same...

I read there was a shop in Denver that redoes the 42 and adds a redesigned stronger torque converter to replace the old one. Does this sound familiar to anyone? Anyone done this? Any ways to beef this trans up a bit? Mine is on the way out I think and I will have to have it redone or swapped...