lift

Only had these on my Jeep for about 700-800 miles, so they are like new. Good quality, just sat too tall on my lightweight Jeep with the rear coil relocator brackets I have installed. I suspect they would work well if paired with a 3” front spring, but would obviously vary based on the weight...

Hey all! Happy holidays and wheeling this time of year. I currently have the Rough Country 4 inch X series suspension lift, savvy inch and a quarter body lift, JKS adjustable rear track bar, BFG KO2 35’s, chrome moly axles, 4:56 gears front and back, brown dog 1” motor mounts and tummy tuck...

Hey all I want to drop my suspension lift down from 4” to 2”. I currently have a 2 inch body lift and a 4 inch Rough Country suspension lift with adjustable control arms. It’s just too much for a few reasons soooo I was thinking of just dropping down to 2” springs, struts, and sway bar links...

I have a 5 inch lift on my 98 Jeep Wrangler tj. I have recently started to improve my lift so it would drive better. I started with the front lowers control arms. I figured it was time for something else to be added. What should I change next? Rear upper control arms or the front track bar is...

So I am looking to upgrade my current 2.5 lift to a 4-inch lift, I currently have a Skyjacker lift and I'm looking to replace it with a new Skyjacker lift. I know that this is not going to be the best, but it is what is in the budget for now. I am also planning to do an SYE with a new Driveshaft...

So the lift kit, tires and wheels and SYE finally all got to my house and I had a free weekend to install it. Overall I’d say it was pretty straightforward. With the help of my two brothers and a car lift it took about 17 hours to install. I did a Rough Country 4 inch lift and 33x12.5 Pro Comp...

Hello all! Looking for some advice. I just bought my 04’ TJ and it came with a 3” body lift on it. It wasn’t too big of a deal until I wanted to remove the nerf bars. They look to be set between a one inch body lift and a two inch body lift piece. Or they just cut a three inch piece and...

Hey guys, I recently bought a 97 tj for a pretty good price. I noticed that it felt sluggish when accelerating , I asked the dude I bought it from and he said he just threw on the lift (4")and tires(35") and didn't mess with the gears (3.55). (Dana 44 rear, and Dana 30 front) Most of the...

Hey all. I’m brand new to the Wrangler community and just got my hands on a 2003 TJ with the 2.4L I4. Well taken care of and has just over 60,000 miles on it. It’s an auto, bone stock. I originally had the intent of doing a 4 inch lift, 33s, doing the SYE and driveshaft, adjustable track...

Im searching for a 2.5" suspension kit, I have seen the 4 shocks and 4 springs from Rough Country but I need opinions. Usually drive my TJ on unpaved roads and offroading, is there another brand you recommend for a softer ride? Also mid budget.

Okay y'all i'm tired of a stock jeep its time to lift her. I'm thinking a 3.5 inch suspension lift with a 1 inch body but i might just do the suspension. I want to be as tall as possible without needing a long arm or messing up my jeep i think 3.5 would be the best. got any advice on complete...

So I’m looking to lift my 2000 Sahara only looking for 2.5-3 of lift for my 32s. The most wheeling this Jeep will see is some light mountain trails that’s it. Mostly looking for a descent ride without breaking the bank too much. I was going to go with the Quadratec lift but after some research...

Selling new 3” Zone lift with Bilstein 5100 3” lift shocks and RC adjustable front track bar. Fits 97-06. Located near Pittsburgh, PA I bought the lift, sold the included shocks and bought the 5100s because IMO they are impossible to beat for the money. I paid a little over 1000, Asking 600...

Hey y'all im in the market for a 3.5 inch suspension lift and I want to hear your view's and thoughts of different brands of lifts!

I'm looking at getting the Zone 4.25" Combo lift for more clearance for my 33s, and the kit comes with a motor mount lift to avoid a transfer case drop. My question is, will I have problems/vibrations with the stock driveshaft while I save for an SYE and new driveshaft? Or should get everything...

Currently I have a 2” OME lift, and if I wanted to get 3” springs, the shocks would over extend, right? I also have a 1.25” body lift so I don’t want to go any higher with that. If I can’t use the OME shocks with taller springs, what’s a good combo of springs and shocks for a 3 or 3.5” lift?

Selling a new and complete 4" Currie Suspension Lift with antirock for a TJ (97-06) still in the box. Will only sell it as a full kit. Bought it for $2600 new but decided to go a different route. Still have receipt. Selling for $2250. My loss is your gain. I will take off $100 if picked up...

I have a 2006 Rubicon with the 4-speed automatic transmission and Dana 44s in the front and rear (I believe it's the 4.10 gearing). I want to lift it 4" and put 33" tires on it (probably 33x10.5—I like the pizza cutter look). My goal is to have a very capable rig to take on a trip from Florida...

Hello everyone! I'm at a dead end with my TJ. First off, I'll list my set up: 2003 Rubicon Tomb Raider 6" Rough Country Long Arm Lift Rough Country HD Steering Upgrade 33" Faulken ATW3 Tires So after doing a 1" Transfer Case drop replacing both driveshafts (SYE)/U joints, new axle bearings...

Hey all, just joined after buying a 98 Sahara. My first TJ was an 03 X that stayed stock. So I got a decent deal on a clean 112k mile 98 with Dana 44 and rebuilt Dana 30 in front. It is sitting on 33x12.50s now, but that was achieved with 2" coil spacers and a 3" BL. Has JKS disconnects already. I...