lift

Specifically I'm looking at the differences in both construction and real world performance associated with the Savvy and Rockmen kits. To be as clear as possible i'm not currently shopping for a mid-arm i've actually been looking at a full johnny joint short arm setup but am curious as to...

I have a 2000 jeep tj with a 2.5 inch lift I need to find cheap shocks that work well, I found pro comp shocks, but they don’t have an opinion for 2.5 inches of lift, it’s only 0-2 inches or 3-4 inches or something like that, will the shocks for a 3inch lift work for my 2.5 inch lift?

I ran across this today when i was searching for some answers to what all the different jacks are. hope this helps if you are looking for a HI-Lift. https://www.roundforge.com/articles/hi-lift-jack-buyers-guide/#Hi-Lift_Lengths_

Hi all! so I bought this jeep in august and I've been doing a solid amount of research into what I want to build it into and I've recently gotten into overlanding (look up expedition overland they're really cool) and now that the (high school) football season is about over I can start working...

Hey all. I am about to start building my LJ into something usable for on and off road. Much like most everyone, this is also my daily driver. Considerations for things like driving many miles each day/month are real for me but not be all end all limiting factors. I want the Jeep to run solid...

First post hopefully this goes well lol I've been reading on here non stop for about 2 months now. Cant seem to find exactly what I need for all of my build. I have a stock 2000 se trying to buy all of my parts now so when im back from deployment ill be ready to get to work. I have so many...

My TJ was a DD when I first got it. I put a lift on it shortly afterwards. It's been running a RE 3.5" lift kit for around 6 or 7 years. I was finally able to replace it with another DD. I've been keeping the miles off of it for just over two years. Now, I mostly wheel it and take it on the...

For those who don't know, I purchased a 2005 Wrangler TJ Unlimited (LJ) about a month ago and it flooded one night due to flash flooding (I will include a pic of my old Jeep flooded). It was then time to start all over again. Im partial to LJ's and Manual Transmissions which limits the number...

https://www.quadratec.com/products/16400_0X33_PG.htm http://zoneoffroad.com/zone-offroad-products-3in-suspension-lift-kit-jeep-wrangler/j2-j3 I need to lift my TJ this summer and I'm a bit conflicted about which lift I should get. I think I should get new lower control arms, but the ones...

Not sure what’s going on possible transfer case or transmission Jeep has 132,xxx miles and I recently installed a 3” lift and 31.5” mud terrains and it ran fun for a couple of months with mild off roading here and there. I was driving for about 30 min at around 70 and then traffic became to a...

What's up everyone, I have jk coils for a 2.5 lift, do they fit on a Tj. If they do I would also end uop getting new shocks. - Thanks

I no longer need my 1" motor mount lift. So, alas, on the classified's it goes! Those motor mounts in the pictures (my original motor mounts) were accidentally modified per the JKS MML instructions for a 4 cylinder TJ. I just didn't know that our 6 cylinder motor mounts didn't need to be...

hi i have a '04 TJ with a 2.4 liter and i need new springs and new shocks. initially i was going to get the new fox adventure or the new falcon but then came the cost of both of them and thats just for shocks... i few months ago i came across a facebook post that was about JKUR suspension...

hi all, New poster but I have read a lot on this forum and taken your advice. I recently bought a new TJ is has a rubicon express long arm lift 5.5 inch. It also has front coil spacers about 2.5 inches with rear coil spacer about 1.3/4 inches. Here is my question: If I remove the spacers will...

my dad has stock 2017 jku rims that i would love to run on my tj im wondering if it will fit height wise should be fine but isnt the tj botl pattern 4.5 and jku is 5.5? thank you in advance

Im in high school, on a permit, and working a summer job saving up for a lift kit and other mods for my 97 Wrangler Sport. Its all stock except for some kc lights up top and various speaker upgrades. Im currently looking at some new wheel/tire packages they offer on quadratec and am aiming...

So I'm learning more and more about my jeep every day. It apparently has coil spacers for the lift and a couple of them are in rough shape. I'd like to upgrade the springs instead of getting new spacers. I'd also like to get blue springs to match my jeep, but I don't know the spring size I need...

Hey everyone! I'm looking at an OME for my new build but I'm interested to know if it's going to make difference for the load weight of my front springs? I'm taking out 2" body spacers. Can I go any larger than 2" with the Bilstein shocks? And regardless of coil size, what do you think the...

I am looking for advise on the proper length Rancho 5000X shocks for my 99 WRANGLER sport. It appears to have a 6" Rough Country lift, at least the current wore out shocks are rough county brand. I come up with the 6" lift was by a chart that I found on the forum. The approximate spring lengths...

I just installed a rock crawler lift kit on my friends jk and I must say that the quality was solid. Made me want to upgrade but as I was searching the web I stumbled on to full traction suspension site. I tried to paste a link to the video on YouTube but my phone won't let me for some reason...