32RH Automatic Transmission Slipping: Rebuild or Replace?

Bayou Hazard

New Member
Original poster
Joined
Oct 20, 2018
Messages
22
Location
Silverton, Oregon
2000 4.0 Auto. Slipping when cold in 1st.
Is this the 32RH Trans?
Is it time to rebuild?
How much does a rebuild cost typically?

Thanks,

Jim
 
That's the 32RH automatic transmission you have.

How many miles are on it? Generally speaking, when an automatic transmission is slipping, it's time for it to be rebuilt.

I can't tell you what it will cost, but I would guess it's going to be around $2000 or so including the labor.

Your best bet is to call local transmission shops that have lots of good Google reviews.

These guys are in Salem (where I live) and have 54 reviews and 4.9 stars on Google:

http://capitaltranscenter.com
 
  • Like
Reactions: Bayou Hazard
Go to Sonnax and read their troubleshooting guide, its on the bottom left hand side of this page under symptoms.
https://www.sonnax.com/units/465-a904
Sometimes a simple band adjustment can fix the problem, sometimes its a throttle lever adjustment can fix some symptoms.

My last rebuild cost me $450 and I too it to the shop and picked it up, I did the removal and re-installation.
 
My 32rh rebuild cost was $1650. That included removal, replacement, relocating the vent, an auxiliary cooler, and installation of the auxiliary cooler.
 
  • Like
Reactions: Jamison C