There's quite a bit of room under the steering column for a amp. A couple "L" brackets and a teflon cutting board make a good mount for it. I used plywood.
There's quite a bit of room under the steering column for a amp. A couple "L" brackets and a teflon cutting board make a good mount for it. I used plywood.
With a HU that outputs a high RMS there is no need to add an amp, for your specific needs it is not necessary. The Sony unit I linked is 45watts RMS per speaker - that is more than enough to drive the polks or better speakers.Hmmm I'll have to look at the space, not really sure I want to embark on that much wiring, hoping for a simple upgrade that is mostly plug and play. What other speaker would I be looking at?
@toximus runs a different speaker config. Match the speaker with your amp. The Polks work great for lower power HU's with their higher impedance. There are better speakers obviously, but Polks are crisp, clear, and drive well with 20 watts RMS. You could consider a 5 channel amp and boost the power rating to run a better speaker. It's an option.
I think when you installed those I mentioned needing to tune them for better results, imagine how the CO first felt. Polk isn’t all that it’s made out to be, if we are being honest.Yes I do. I had installed the commonly recommended Polk setup and was disappointed as soon as I connected it up. I don't know of a better setup for the money though so I'm not sure I'm of much help here...
With a HU that outputs a high RMS there is no need to add an amp, for your specific needs it is not necessary. The Sony unit I linked is 45watts RMS per speaker - that is more than enough to drive the polks or better speakers.
For the subwoofer you are planning on putting into the center console, a small mono amp can be mounted under the dash like @bobthetj03 said, but I would first do speakers and see if the subwoofer is still wanted.
Whatvever HU you choose will be able to drive and tune the OEM center console subwoofer better than stock. Audio is my thing, so I experimented heavily with the OEM sub before upgrading.
Ah that makes sense, I keep my phone plugged in so it hasn’t bothered me - but wireless CarPlay is nice. Speaker choice depends on what you are going to use to drive them - do you want to run them off the HU or add amplifier? If just HU, you are using the Kenwood?A few downsides I see to the Sony are, it does not support wireless Car Play, and the screen is Bigger but does not appear to be HD.
What speakers do you recommend?
Ah that makes sense, I keep my phone plugged in so it hasn’t bothered me - but wireless CarPlay is nice. Speaker choice depends on what you are going to use to drive them - do you want to run them off the HU or add amplifier? If just HU, you are using the Kenwood?
Does the amp require a dedicated larger gauge power lead direct to the battery?
Yes. Adding an amp will always need a larger power wire (run to relay, battery, or power bank)Nooooo clue.... @Chris
Awesome, do I need to order any speaker wire for the sub and amp to go with this?
Nooooo clue.... @Chris
8 gauge on the power wire would be sufficient.