Well this beast was built over the last 20 years so I won’t have pick of all the installs but I’ll post picks of the goodies. I’ve never made a build thread before. It was rescently hit with some good hail so it’s getting a facelift and I got the bug again to mod it even further. Here’s the list of goodies
It currently has 122000 original miles but only 3k on engine tranny and transfer case as they were all rebuilt or replaced last winter due to a rod issue. So I figured if the engine was out why not.
New engine and head added roller rockers, and griffin aluminum radiator all pulleys and alternator and ps pump replaced with engine. Along with a borla header.
4,0L
AX-15 with B&M short throw shifter
Atlas 4 speed transfer case 1:1, 2.72:1, 3.8:1, 10.34:1
PSC hydro assist kit with BMB ram mounts
Tom woods rear shaft
Currie Rock Jock 60 Rear axle with ARB locker and 5.13 gears BMB parking brake brackets to move the calipers to the front side of the axle
G2 CORE 44 high pinion front axle with 5.13’s and an ARB also Vanco 16” big brake kit and BMB pads, American Iron offroad ball joint eliminators, Johnny joints in axle side upper mounts
ARB twin compressor
Savvy ultimate steering
Black magic brake pads
15x9 Spyderlock beadlock wheels
35x12.50R15 Mickey Thompson Baja boss MT
Fox factory race series 12” 2.0 shocks with Custom tune at all four corners
Currie Antirock front and rear
Front Suspension- Jeep west 3 link mid arms 4” Currie coils
Rear Suspension - Genright 4-5” rear 4 link stretch suspension with currie lj coils with spring relocation and outboard shocks
Genright 19 gallon Stretch fuel tank & skid
Genright fuel pump access panel cut into the rear floor
Genright Aluminum rear corner armor and 4” aluminum flares
Genright 4” Aluminum highline front fenders
Hood cut for highline fenders, hood vent panel and flush mounted hood pins
Rokmen aluminum drop down tailgate with storage
Poison Spyder brawler bar front bumper
Genright stretch mini boatside Sliders with rails
Stand alone transmission crossmember
Customized UCF ultra clearance belly skid plate
UCF Aluminum engine skid plate
Custom exhaust
Warn Zeon Platinum10S winch with synthetic line and factor 55 flat e Link
Flush mount rear bumper that’s a copy of a SWAG bumper
Genright aluminum tire carrier
Braided extended brake lines front and rear
Midland gmrs radio
TeraFlex hand throttle
PRP Enduro Elite seats
Bestop supertop NX with sunrider
Roll bar custom done based off of a Poison Spider cage but added extras. And more tube to come in the next few months.
Rough Country MLC-6 switch controls
Quadratech truck light LED headlights, maxbuilt trail tail lightSmoked JK front turn signals mounted into grill
Genright marker/ turn signal lights up front
Led light pods and rock lights
Double din stereo with front and rear cameras, custom built steel rear speaker pods mounted to the cage with 6.5” Polk audio speakers, Polk audio 5.25” in dash, viper alarm, two stand alone gps trackers and multiple kill switches added.
I’m sure there is more but it’s late and I’m tired. I ad some pics in the next few days
It currently has 122000 original miles but only 3k on engine tranny and transfer case as they were all rebuilt or replaced last winter due to a rod issue. So I figured if the engine was out why not.
New engine and head added roller rockers, and griffin aluminum radiator all pulleys and alternator and ps pump replaced with engine. Along with a borla header.
4,0L
AX-15 with B&M short throw shifter
Atlas 4 speed transfer case 1:1, 2.72:1, 3.8:1, 10.34:1
PSC hydro assist kit with BMB ram mounts
Tom woods rear shaft
Currie Rock Jock 60 Rear axle with ARB locker and 5.13 gears BMB parking brake brackets to move the calipers to the front side of the axle
G2 CORE 44 high pinion front axle with 5.13’s and an ARB also Vanco 16” big brake kit and BMB pads, American Iron offroad ball joint eliminators, Johnny joints in axle side upper mounts
ARB twin compressor
Savvy ultimate steering
Black magic brake pads
15x9 Spyderlock beadlock wheels
35x12.50R15 Mickey Thompson Baja boss MT
Fox factory race series 12” 2.0 shocks with Custom tune at all four corners
Currie Antirock front and rear
Front Suspension- Jeep west 3 link mid arms 4” Currie coils
Rear Suspension - Genright 4-5” rear 4 link stretch suspension with currie lj coils with spring relocation and outboard shocks
Genright 19 gallon Stretch fuel tank & skid
Genright fuel pump access panel cut into the rear floor
Genright Aluminum rear corner armor and 4” aluminum flares
Genright 4” Aluminum highline front fenders
Hood cut for highline fenders, hood vent panel and flush mounted hood pins
Rokmen aluminum drop down tailgate with storage
Poison Spyder brawler bar front bumper
Genright stretch mini boatside Sliders with rails
Stand alone transmission crossmember
Customized UCF ultra clearance belly skid plate
UCF Aluminum engine skid plate
Custom exhaust
Warn Zeon Platinum10S winch with synthetic line and factor 55 flat e Link
Flush mount rear bumper that’s a copy of a SWAG bumper
Genright aluminum tire carrier
Braided extended brake lines front and rear
Midland gmrs radio
TeraFlex hand throttle
PRP Enduro Elite seats
Bestop supertop NX with sunrider
Roll bar custom done based off of a Poison Spider cage but added extras. And more tube to come in the next few months.
Rough Country MLC-6 switch controls
Quadratech truck light LED headlights, maxbuilt trail tail lightSmoked JK front turn signals mounted into grill
Genright marker/ turn signal lights up front
Led light pods and rock lights
Double din stereo with front and rear cameras, custom built steel rear speaker pods mounted to the cage with 6.5” Polk audio speakers, Polk audio 5.25” in dash, viper alarm, two stand alone gps trackers and multiple kill switches added.
I’m sure there is more but it’s late and I’m tired. I ad some pics in the next few days
Last edited: