California Rubicon Trail Run

You should have seen Indy's pan after that run! His was way worse. That was pre- V8.
Here you go ... this was with 4 inch lift and 35s.

ImageUploadedByTapatalk1411328097.150633.jpg


ImageUploadedByTapatalk1411328112.664366.jpg
 
Updated

NAMEVEH.LIFTTIRESWINCHGEARSFRONTREARTRANSTC GEAR
DrDmoneyTJ4.04.535”Yes5.3844/Locker44/LockerManual4:1
Alex01TJ4.04+1.2535”Yes4.8844/Locker44/LockerManual2.72:1
bobthetj03TJ4.02.5+3/433”Yes4.56Dana 30/Open44/LSDManual2.72:1
DarylTJR6”37”Yes5.1344/Locker44/LockerManual4:1
ThunderheadTJR2”BB32”beer/jerky4.1144/Locker44/LockerAutomatic4:1
06TJ35'sTJ435”No4.563044Manual2.72:1
Indy5.3TJ4+1.2535”Yes4.56HP30/Open44/LockerAutomatic2.72:1
mtngoattjTJ4.5”33”Yes4.56S30/LockerS35/LockerManual2.72:1
ImpactOrangeTJ4”35”Yes5.13S30/LockerDana 44/LockerAutomatic2.72:1

NAMEVEH.LIFTTIRESWINCHGEARSFRONTREARTRANSTC GEAR
Alex01’s F.I.L.JKU3”35”No3.73 ?Dana 30/LSDDana 44/LSDAutomatic2.72:1
X1buellistJKU3.5”35”Yes44/Locked44/LockedManual4:1
FirstsilverLJLJ3”33"yes4.88LockedLockedAutomatic2.72:1
My buddy SergioT4R6”37”Yes4.8844/Locker44/LockerManualTwo boxes
49mercpapoTJ4”35”Yes4.88Dana 30/openDana 35/openManual2.72:1
 
Last edited:
Oil pan skid
@tomtaylz may be nice and send you a photo of the bolt directions / holes we used. I swear that oil pan was more of a PITA to get to line up with the oil drain then TT was to install :ROFLMAO: Once you know the location / direction though it's easy.
 
  • Like
Reactions: DrDmoney
@tomtaylz may be nice and send you a photo of the bolt directions / holes we used. I swear that oil pan was more of a PITA to get to line up with the oil drain then TT was to install :ROFLMAO: Once you know the location / direction though it's easy.

Yea there are a few write ups on here for the savvy engine/oil skid. They talked about the bolts and direction
 
  • Like
Reactions: tomtaylz and Alex01